Service manual

3 - 53
CHK
ADJ
CHECKING THE WHEEL/
CHECKING AND LUBRICATING THE CABLE
CHECKING THE WHEEL
1.Check:
●
Wheels 1
Damage/bends → Replace.
N
OTE:
Always balance the wheel when a tire or wheel
has been changed or replaced.
WARNING
●
Never attempt even small repairs to the
wheel.
●
Ride conservatively after installing a tire
to allow it to seat itself properly on the
rim.
CHECKING AND LUBRICATING THE
CABLE
WARNING
A damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may result
so replace a damaged cable as soon as
possible.
1.Check:
●
Cable sheath
Damage → Replace.
2.Check:
●
Cable operation
Unsmooth operation → Lubricate or replace.
N
OTE:
Hold the cable end up and apply several drops
of lubricant to the cable.
3.Apply:
●
Lithium-soap-based grease
(onto end of the cable)
Recommended lubricant:
Yamaha chain and cable lube or
Engine oil
Not For Resale
www.SmallEngineDiscount.com