Service manual
4 - 74
ENG
TRANSMISSION
CHECKING THE CHAIN
1.Check:
●
Chain
Cracks/shift → Replace the chain, secondary
shaft and driven sprocket as a set.
CHECKING THE STOPPER LEVER AND
STOPPER WHEEL
1.Check:
●
Stopper lever pawl 1
Bends/damage/wear → Replace the stopper
lever and stopper wheel as a set.
●
Stopper wheel 2
Damage/wear → Replace the stopper wheel
and stopper lever as a set.
●
Shaft 3
Bends/damage/wear → Replace.
INSTALLING THE TRANSMISSION
1.Install:
●
Shift cam
●
Washer
●
Spring (short)
●
Shift fork “R” 1
●
Drive axle assembly 2
●
Guide bar 3
●
Clutch dog 2 4
●
Spring (long) 5
●
Shift fork “L” 6
N
OTE:
Install the shift fork with the “R” mark facing
towards the right side of the crankcase and the
shift fork with the “L” mark facing towards the
left side of the crankcase. Be sure that the shift
fork guide pin is properly seated in the shift
drum groove.
Not For Resale
www.SmallEngineDiscount.com