Service manual

7 - 9
DRIV
REMOVING THE UNIVERSAL JOINT
1.Remove:
●
Universal joint
*****************************************************
Removal steps:
●
Remove the circlips 1.
●
Place the U-joint in a press.
●
With a suitable diameter pipe 2 beneath the
yoke 3, press the bearing 4 into the pipe as
shown.
N
OTE:
It may be necessary to lightly tap the yoke with
a punch.
●
Repeat the steps for the opposite bearing.
●
Remove the yoke.
N
OTE:
it may be necessary to lightly tap the yoke with
a punch.
*****************************************************
2.Remove:
●
Universal joint yoke
Use a universal joint holder 1.
Universal joint holder:
P/N. YM-04062, 90890-04062
REMOVING THE RING GEAR
1.Remove:
●
Ring gear 1
N
OTE:
The ring gear and the differential gear cover
should be fastened together. Do not
disassemble the differential gear assembly.
CAUTION:
The differential gears are assembled into a
proper unit at the factory by means of
specialized equipment. Do not attempt to
disassemble this unit. Disassembly will
result in the malfunction of the unit.
FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR
Not For Resale
www.SmallEngineDiscount.com