Service manual
8 - 20
CHAS
FRONT AND REAR BRAKES
●
Be careful that water does not enter the
brake master cylinder when refilling.
Water will significantly lower the boiling
point of the brake fluid and may result in
vapor lock.
4.Air bleed:
●
Brake system
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” in CHAPTER 3.
5.Check:
●
Brake fluid level
Brake fluid level is under the “LOWER” level
line → Fill up.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in CHAPTER 3.
INSTALLING THE REAR BRAKE MASTER
CYLINDER
1.Install:
●
Copper washers 1
●
Brake hose 2
●
Union bolt 3
CAUTION:
When installing the brake hose onto the
brake master cylinder, make sure the brake
pipe touches the projection a as shown.
WARNING
Proper brake hose routing is essential to
insure safe machine operation. Refer to
“CABLE ROUTING” in CHAPTER 2.
New
T
R
.
.
30 Nm (3.0 m • kg, 22 ft • lb)
Not For Resale
www.SmallEngineDiscount.com