Service manual
8 - 47
CHAS
FRONT ARMS AND FRONT SHOCK ABSORBER
INSTALLING THE FRONT ARMS AND
FRONT SHOCK ABSORBER
1.Install:
●
Front arms
●
Front shock absorber
*****************************************************
Installation steps:
●
Install the front upper arm 1 and front lower
arm 2.
N
OTE:
●
Lubricate the bolts 3 with lithium-soap-
based grease.
●
Be sure to position the bolts 3 so that the
bolt head faces outward.
●
Temporarily tighten the nuts 4.
●
Install the front shock absorber 5.
●
Install the ball joints.
●
Install the new cotter pins.
●
Tighten the nuts 4.
N
OTE:
Before tightening the nuts 4, adjust the length
a to 310 mm (12.2 in).
*****************************************************
T
R
.
.
Nut 6:
45 Nm (4.5 m • kg, 32 ft • lb)
T
R
.
.
Nut 7:
30 Nm (3.0 m • kg, 22 ft • lb)
T
R
.
.
Nut 4:
45 Nm (4.5 m • kg, 32 ft • lb)
Not For Resale
www.SmallEngineDiscount.com