Service manual

9 - 44
– +
ELEC
2WD/4WD SELECTING SYSTEM
C0NTINUITY
CONTINUITY
4.Four-wheel drive relay 1
●
Remove the four-wheel drive relay 1 from
the wire harness.
●
Connect the pocket tester (Ω × 1) and the
battery (12 V) to the four-wheel drive relay
1 terminals.
Tester (+) lead →
Brown/Black terminal 1
Tester (–) lead → Black terminal 2
Battery (+) terminal →
Brown/Red terminal 3
Battery (–) terminal →
Blue/Green terminal 4
Tester (+) lead →
Brown/Black terminal 1
Tester (–) lead → Brown/Red terminal 5
●
Check the four-wheel drive relay 1 for
continuity.
*
NO CONTINUITY
Replace the four-wheel drive relay 1.
CONTINUITY
5.Four-wheel drive relay 2
●
Remove the four-wheel drive relay 2 from
the wire harness.
●
Connect the pocket tester (Ω × 1) and the
battery (12 V) to the four-wheel drive relay
2 terminals.
Tester (+) lead →
Black/Yellow terminal 1
Tester (–) lead → Black terminal 2
Battery (+) terminal →
Brown/Red terminal 3
Battery (–) terminal →
Blue/Red terminal 4
Tester (+) lead →
Black/Yellow terminal 1
Tester (–) lead → Brown/Red terminal 5
●
Check the four-wheel drive relay 2 for
continuity.
*
NO CONTINUITY
Replace the four-wheel drive relay 2.
Not For Resale
www.SmallEngineDiscount.com