Service manual

9 - 45
– +
ELEC
2WD/4WD SELECTING SYSTEM
C0NTINUITY
CONTINUITY
6.Four-wheel drive relay 3
●
Remove the four-wheel drive relay 3 from
the wire harness.
●
Connect the pocket tester (Ω × 1) and the
battery (12 V) to the four-wheel drive relay
3 terminals.
Tester (+) lead →
Brown/Red terminal 1
Tester (–) lead →
Yellow/Black terminal 2
Battery (+) terminal →
Brown/Red terminal 1
Battery (–) terminal →
Yellow/Black terminal 2
Tester (+) lead → Blue/Red terminal 3
Tester (–) lead → Gray terminal 4
●
Check the four-wheel drive relay 3 for
continuity.
*
NO CONTINUITY
Replace the four-wheel drive relay 3.
CORRECT
7.On-command four-wheel drive switch and
differential gear lock switch
Refer to “CHECKING THE SWITCH”.
*
INCORRECT
Replace the on-command four-wheel drive
switch and differential gear lock switch.
Not For Resale
www.SmallEngineDiscount.com