Service manual

2 - 32

SPEC

È Fasten the wire harness with a plastic band.

É Fasten the starter motor lead, wire harness, negative battery lead, final gear case breather hose,

rectifier/regulator lead, low-range switch lead, high-range switch lead, neutral switch lead, reverse switch

lead, speed sensor lead and A.C. magneto lead with a plastic band.

Ê Fasten the wire harness, starter motor lead with a plastic band.

Ë Fasten the low-range switch lead, high-range switch lead, neutral switch lead, reverse switch lead, speed

sensor lead, A.C. magneto lead, rectifier/regulator lead and negative battery lead with a plastic band.

CABLE ROUTING

Not For Resale