Owner`s manual

4-4

EBU18031

Multifunction display

The speedometer unit is equipped with the follow-

ing:

● a speedometer (which shows the riding speed)

● an odometer (which shows the total distance

traveled)

● two tripmeters (which show the distance trav-

eled since they were last set to zero)

● a clock

● an hour meter (which shows the total time the

key has been turned to “ON”)

Odometer and tripmeter modes

Pushing the “TRIP/ODO” button switches the dis-

play between the odometer mode “ODO” and the

tripmeter modes “A” and “B” in the following order:

ODO → TRIP A → TRIP B → ODO

To reset a tripmeter, select it by pushing the

“TRIP/ODO” button, and then push the

“TRIP/ODO” button for at least three seconds. The

tripmeters can be used to estimate the distance

that can be traveled with a full tank of fuel. This in-

formation will enable you to plan future fuel stops.

NOTE:

Holding in the “TRIP/ODO” button and then turning

the key to “ON” switches the display between

“mph” and “km/h”.

Clock mode

Pushing the “”/“” button switches the display

between the clock mode “CLOCK” and the hour

meter mode “HOUR” in the following order:

CLOCK → HOUR → CLOCK

1. Speedometer

2. “H” button

3. “M” button

4. Clock/Hour meter

5. Odometer/Tripmeter A/Tripmeter B

6. TRIP/ODO button

7. Clock/Hour “”/“” button

U1D913E0.book Page 4 Thursday, April 20, 2006 2:47 PM