Owner`s manual

4-10
4
To release the differential gear lock, stop the ATV
and push the switch to the “4WD” position.
WARNING
EWB00091
1. On-Command differential gear lock switch “4WD”/“LOCK”
POTENTIAL HAZARD
Changing from four-wheel drive to four-
wheel-drive differential gear lock or vice-ver-
sa while the ATV is moving.
WHAT CAN HAPPEN
The ATV handles differently in four-wheel
drive than in differential gear lock in some
circumstances. Changing from four-wheel
drive to differential gear lock or vice-versa
while moving may cause the ATV to handle
differently unexpectedly. This could distract
the operator and increase the risk of losing
control and causing an accident.
HOW TO AVOID THE HAZARD
Always stop the ATV before changing from
four-wheel drive to four-wheel-drive differen-
tial gear lock or vice-versa.
U1D913E0.book Page 10 Thursday, April 20, 2006 2:47 PM