Service manual

3 - 48
CHK
ADJ
ADJUSTING THE FRONT SHOCK ABSORBERS
NOTE:
_
Always tighten the locknut against the adjust-
ing ring, then torque it to specification.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Steering nut wrench
P/N. YU-33975, 90890-01443
T
R
.
.
Locknut
30 Nm (3.0 m · kg, 22 ft · lb)
2. Adjust:
• rebound damping force
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Turn the adjusting screw
1
in direction
a
or
b
.
CAUTION:
_
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Direction
a
Rebound damping force
is increased.
Direction
b
Rebound damping force
is decreased.
From the fully turned-in position
Standard: 12 clicks out
Minimum: 22 clicks out
Maximum: 1 click out
1
b
a