Service manual

3 - 66
CHK
ADJ
REPLACING A HEADLIGHT BULB
EBS00124
REPLACING A HEADLIGHT BULB
1. Remove:
• headlight
Refer to “SEAT, FENDERS AND FUEL
TANK”.
2. Disconnect:
• headlight lead coupler
1
3. Remove:
• headlight bulb holder cover
2
1
2
4. Remove:
• bulb holder
1
• bulb
NOTE:
_
Push the headlight bulb holder inward, turn it
counterclockwise and remove the defective
bulb.
WARNING
_
Keep flammable products and your hands
away from the bulb while it is on. since it
will be hot. Do not touch the bulb until it
cools down.
5. Install:
• bulb
Secure the new bulb with the headlight unit.
CAUTION:
_
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
1
New