Service manual

4 - 44
ENG
A.C. MAGNETO
EBS00259
REMOVING THE A.C. MAGNETO ROTOR
1. Remove:
• A.C. magneto cover
NOTE:
_
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
2. Remove:
• A.C. magneto rotor nut
1
• washer
NOTE:
_
• While holding the A.C. magneto rotor
2
with
the sheave holder
3
, loosen the rotor nut.
• Do not allow the sheave holder to touch the
projection
4
on the rotor.
Sheave holder
P/N. YS-01880-A, 90890-01701
3
4
1
2
3. Remove:
• A.C. magneto rotor
1
NOTE:
_
Use the rotor puller
2
.
Rotor puller
P/N. YM-04142, 90890-04142
1
2
EBS00262
CHECKING THE STATOR COIL AND
PICKUP COIL
1. Check:
• stator coil
• pickup coil
Damage
→
Replace the pickup coil/stator
assembly.