Service manual

4 - 46
ENG
A.C. MAGNETO
CHECKING THE TORQUE LIMITER
1. Check:
• torque limiter
Damage/wear → Replace.
EBS00268
INSTALLING THE A.C. MAGNETO ROTOR
1. Install:
• stator coil 1
• pickup coil
NOTE:
_
Align the projection a on the stator coil with
the slot b in the A.C. magneto cover.
a
b
1
2. Apply:
• sealant (Quick Gasket
®
) or Yamaha bond
No. 1215 1
(into the slit)
Sealant (Quick Gasket
®
)
P/N. ACC-11001-05-01
Yamaha bond No. 1215
P/N. 90890-85505
1
3. Install:
• woodruff key
• A.C. magneto rotor
NOTE:
_
• Before installing the rotor, clean the outside
of the crankshaft and the inside of the rotor.
• After installing the rotor, check that the rotor
rotates smoothly. If not, reinstall the key and
rotor.