Service manual

4 - 54
ENG
CLUTCH
6. Install:
• clutch cover 1
NOTE:
_
Tighten the bolts in stages, using a crisscross
pattern.
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
7. Install:
• clutch cable 1
8. Check:
• clutch cable length a
Out of specification → Adjust.
NOTE:
_
Push the push lever in direction b and check
the cable length a.
9. Adjust:
• clutch cable length
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the circlip and washer.
b. Remove the push lever.
c. Install the push lever so that the clutch
cable length is within specification.
d. Install the washer and a new circlip.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Clutch cable length
38.0 ~ 45.2 mm (1.50 ~ 1.78 in)
1
a
b