Service manual

4 - 64
ENG
SHIFT SHAFT
2. Install:
• stopper lever spring 1
• stopper lever 2
NOTE:
Align the stopper lever roller with a slot on the
shift drum segment.
1
2
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
3. Install:
• springs 1
• pawl pins 2
• pawls 3
• shift guide 4
(to the pawl holder)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
4. Install:
• shift lever assembly 1
• shift guide 2
NOTE:
The shift lever assembly is installed at the
same time as the shift guide.
1
2
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
INSTALLING THE SHIFT SHAFT
1. Install:
• roller 1
• shift shaft spring
• shift shaft 2
NOTE:
• Install the end of the shift shaft spring onto
the shift shaft spring stopper 3.
• Install the end of the shift shaft lever onto the
roller 1.
2. Install:
• shift pedal
3. Adjust:
• shift pedal height
Refer to “ADJUSTING THE SHIFT PEDAL”
in chapter 3.
3
2
1
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)