Service manual

4 - 80
ENG
TRANSMISSION
EBS00356
INSTALLING THE TRANSMISSION
1. Install:
• shift fork “L”
1
(to drive axle)
• shift fork “C”
2
(to main axle)
• shift fork “R”
3
(to drive axle)
• shift drum
4
• transmission assembly
NOTE:
_
The embossed marks on the shift forks should
face towards the right side of the engine and
be in the following sequence: “R”, “C”, “L”. Be
sure that the shift fork cam follower is properly
seated in the shift drum groove.
2. Check:
• shift operation
Unsmooth operation
→
Repair.
NOTE:
_
• Oil each gear and bearing thoroughly.
• Before assembling the crankcase, be sure
that the transmission is in neutral and that
the gears turn freely.
3
4
1
2