Service manual

7 - 4
CHAS
EBS00383
CHECKING THE WHEELS
1. Check:
• wheels
2. Measure:
• wheel runout
Over the specified limit
→
Replace the
wheel or check the wheel bearing play
1
.
3. Check:
• wheel balance
Out of balance
→
Adjust.
WARNING
_
After replacing the tire, ride conservatively
to allow the tire to be properly seated in the
rim. Failure to do so may cause an accident
resulting in machine damage and possible
operator injury.
Wheel runout limit
Radial
2
: 2.0 mm (0.08 in)
Lateral
3
: 2.0 mm (0.08 in)
EBS00385
CHECKING THE WHEEL HUBS
1. Check:
• wheel hubs
1
Cracks/damage
→
Replace.
• splines (wheel hub)
2
Wear/damage
→
Replace the wheel hub.
È
Front
É
Rear
È
É
FRONT AND REAR WHEELS