Service manual

7 - 7
CHAS
EBS00390
INSTALLING THE WHEEL HUBS
1. Install:
• front axle nuts
1
• rear axle nuts
1
• cotter pins
2
NOTE:
_
Do not loosen the axle nut after torquing it. If
the axle nut groove is not aligned with the cot-
ter pin hole, align the groove with the hole by
tightening the axle nut.
T
R
.
.
70 Nm (7.0 m · kg, 50 ft · lb)
T
R
.
.
120 Nm (12.0 m · kg, 85 ft · lb)
New
FRONT AND REAR WHEELS