Service manual

7 - 12
CHAS
REAR AXLE AND REAR AXLE HUB
INSTALLING THE DRIVEN SPROCKET
1. Install:
• driven sprocket
NOTE:
Make sure that the blunt-edged corner a of
the driven sprocket is facing outward.
a
EBS00397
INSTALLING THE REAR AXLE
1. Install:
• conical spring washer 1
NOTE:
Install the conical spring washer with the con-
vex side of the washer facing outward as
shown.
1
2. Tighten:
• nut 1
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Tighten the nut with PTT wrench 46 or rear
axle nut wrench 2 to specification while
holding the rear axle.
b. Tighten bolts 3.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
PTT wrench 46
P/N. 90890-06588
Axle nut wrench (46 mm)
P/N. YM-37134
T
R
.
.
Nut
100 Nm (10.0 m · kg, 72 ft · lb)
LOCTITE
®
T
R
.
.
Bolt
7 Nm (0.7 m · kg, 5.1 ft · lb)
LOCTITE
®
3
3
1