Service manual

7 - 25
CHAS
EBS00415
ASSEMBLING THE FRONT BRAKE
MASTER CYLINDER
WARNING
_
• All internal brake components should be
cleaned and lubricated with new brake
fluid only before installation.
• Whenever a master cylinder is disassem-
bled, replace the piston seals and dust
seals.
Recommended brake fluid
DOT 4
EBS00416
ASSEMBLING THE REAR BRAKE MASTER
CYLINDER
WARNING
_
• All internal brake components should be
cleaned and lubricated with new brake
fluid only before installation.
• Whenever a master cylinder is disassem-
bled, replace the piston seals and dust
seals.
1. Install:
• brake master cylinder kit
• nut
1
• joint
2
NOTE:
_
Turn the adjusting bolt
3
until the clearance
a
is within the specified limits when install the
joint
2
.
2. Tighten:
• nut
1
Recommended brake fluid
DOT 4
Clearance
2.2 ~ 3.2 mm (0.09 ~ 0.13 in)
a
3
1
2
T
R
.
.
18 Nm (1.8 m · kg, 13 ft · lb)
FRONT AND REAR BRAKES