Service manual

7 - 37
CHAS
2. Install:
• brake caliper piston 1
3. Install:
• lock washer 1
• brake pad holding bolts 2
4. Bend the lock washer tabs along a flat side
of the bolts.
New
T
R
.
.
18 Nm (1.8 m · kg, 13 ft · lb)
5. Mesh the bearing race tab 1 with parking
brake case slit.
1
6. Install:
• parking brake arm 1
NOTE:
Align the center of the parking brake arm with
a adjuster nut corner a and position the park-
ing brake arm as shown.
7. Measure:
• parking-brake-arm-to-parking-brake-
bracket distance b
Out of specification → Adjust.
Parking-brake-arm-to-parking-
brake-bracket distance
58 mm (2.28 in)
1
b
a
FRONT AND REAR BRAKES