Service manual

7 - 39
CHAS
3. Air bleed:
• brake system
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” in chapter 3.
4. Check:
• brake fluid level
Brake fluid level is below the “LOWER”
level line → Add the recommended brake
fluid to the proper level.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
EBS00436
INSTALLING THE REAR BRAKE CALIPER
1. Install:
• brake caliper assembly
• brake caliper mounting bolts 1
• brake hose 2
• copper washers 3
• union bolt 4
CAUTION:
_
When installing the brake hose on the
brake caliper, make sure that the brake
pipe touches the projection
a
on the brake
caliper.
WARNING
_
Proper brake hose routing is essential to
insure safe machine operation. Refer to
“CABLE ROUTING” in chapter 2.
2. Fill:
• brake reservoir
Recommended brake fluid
DOT 4
1
3
1
2
4
a
New
T
R
.
.
31 Nm (3.1 m · kg, 22 ft · lb)
New
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
FRONT AND REAR BRAKES