Service manual

7 - 44
CHAS
STEERING SYSTEM
EBS00449
INSTALLING THE HANDLEBAR
1. Install:
• handlebar
• handlebar holders
NOTE:
_
• Install the handlebar within 3.3° from the hor-
izontal line shown in the illustration.
• The upper handlebar holder should be
installed with the punched mark
1
forward
2
.
CAUTION:
_
First tighten the bolt
3
on the front side of
the handlebar holder, and then tighten the
bolt
4
on the rear side.
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
EBS00450
INSTALLING THE HANDLEBAR GRIPS
1. Install:
• handlebar grips
1
NOTE:
_
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
• Install the handlebar grips to the handlebar
so that the line
b
between the two arrow
marks faces straight upward.