Service manual

2 - 2
SPEC
GENERAL SPECIFICATIONS
Carburetor
Type/quantity 5TG1 00 × 1
Manufacturer KEIHIN
Spark plug
Type/manufacturer CR8E/NGK
Spark plug gap 0.7 ~ 0.8 mm (0.028 ~ 0.031 in)
Clutch type
Wet, multiple disc
Transmission
Primary reduction system Spur gear
Primary reduction ratio 62/22 (2.818)
Secondary reduction system Chain drive
Secondary reduction ratio 38/14 (2.714)
Transmission type Constant mesh, 5-speed
Operation Left foot operation
Gear ratio
1st gear 29/12 (2.416)
2nd gear 27/14 (1.928)
3rd gear 25/16 (1.562)
4th gear 23/18 (1.277)
5th gear 21/20 (1.050)
Chassis
Frame type Steel tube frame
Caster angle 5°
Camber angle –1.5°
Kingpin angle 15.4°
Kingpin offset 1.0 mm (0.04 in)
Trail 21.0 mm (0.83 in)
Tread (STD) front 950 mm (37.40 in)
rear 900 mm (35.43 in)
Toe-in (with tires touching the ground) 2 ~ 12 mm (0.08 ~ 0.47 in)
Tire
Type Tubeless
Size front AT21 × 7-10
rear AT20 × 10-9
Manufacturer front DUNLOP
rear DUNLOP
Type front KT331A Radial
rear KT355 Radial
Tire pressure (cold tire)
Maximum load* 100 kg (220 lb)
Off-road riding front 30 kPa (0.30 kg/cm
2
, 4.4 psi)
rear 35 kPa (0.35 kg/cm
2
, 5.0 psi)
*Load in total weight of cargo, rider and
accessories
Item Standard