Service manual

7 - 48
CHAS
STEERING SYSTEM
EBS00455
REMOVING THE BEARING RETAINER
1. Remove:
• bearing retainer
Damper rod holder (30 mm)
P/N. YM-01327, 90890-01327
EBS00456
CHECKING THE STEERING STEM
1. Check:
• steering stem
Bends
→
Replace.
WARNING
_
Do not attempt to straighten a bent stem;
this may dangerously weaken the stem.
2. Check:
• oil seals
1
• steering stem bushings
2
Wear/damage
→
Replace.
New
EBS00457
INSTALLING THE BEARING RETAINER
1. Install:
• bearing retainer
Damper rod holder (30 mm)
P/N. YM-01327, 90890-01327
T
R
.
.
65 Nm (6.5 m · kg, 47 ft · lb)
INSTALLING THE STEERING STEM
1. Install:
• steering stem
NOTE:
_
Pass the throttle cable through the cable
guide. Refer to “CABLE ROUTING” in
chapter 2.