Service manual

7 - 68
CHAS
SWINGARM AND DRIVE CHAIN
4. Check:
• O-rings 1
Damage → Replace the drive chain.
• drive chain rollers 2
Damage/wear → Replace the drive chain.
• drive chain side plates 3
Cracks/damage/wear → Replace the drive
chain.
5. Lubricate:
• drive chain
6. Check:
• drive sprocket
• driven sprocket
More than 1/4 tooth a wear → Replace the
drive chain sprockets as a set.
Bent teeth → Replace the drive chain
sprockets as a set.
b
Correct
1
Drive chain roller
2
Drive chain sprocket
Recommended lubricant
Engine oil or chain lubricant
suitable for O-ring chains
EBS00497
INSTALLING THE SWINGARM
1. Install:
• bearings 1
• bushings 2
(to swingarm)
• spacer 3
NOTE:
_
Apply the lithium-soap-based grease on the
bushing when installing.
Installed depth of bearing
a
5 mm (0.20 in)
Installed depth of bushing
b
8 mm (0.31 in)
1
2
3
23
1
a
b
b
a
64.7 mm
(2.55 in)