Service manual

3 - 20
CHK
ADJ
CHECKING THE ENGINE OIL LEVEL
3. Check:
• engine oil level
Oil level should be between the minimum
level mark a and the maximum level mark
b.
Low oil level → Add oil to the proper level.
NOTE:
_
• Wait a few minutes until the oil settles before
checking the oil level.
• Do not screw the dipstick 1 in when check-
ing the oil level.
NOTE:
_
Recommended oil classification:
API Service “SE”, “SF”, “SG” type or equiva-
lent (e.g. “SF—SE—CC”, “SF—SE—SD” etc.)
CAUTION:
_
• Do not add any chemical additives.
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
• Do not allow foreign material to enter the
crankcase.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check:
• engine oil level
NOTE:
_
Before checking the engine oil level, wait a few
minutes until the oil has settled.
Recommended oil
Follow the chart on the left.
1
a
b