Service manual

3 - 22
CHK
ADJ
CHANGING THE ENGINE OIL
9. If the oil filter element is also to be replaced,
perform the following procedure.
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the oil filter element cover 1 and
oil filter element 2.
b. Check the O-rings 3 and replace them if
they are cracked or damaged.
c. Install the new oil filter element and the oil
filter element cover.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
10.Check:
• engine oil drain bolt gasket
Damage → Replace.
11.Install:
• engine oil drain bolt (crankcase)
(along with the gasket)
• engine oil drain bolt (oil tank)
(along with the washer)
• oil filter element drain bolt
12.Fill:
• oil tank
(with the specified amount of the recom-
mended engine oil)
• crankcase
(with the specified amount of the recom-
mended engine oil)
T
R
.
.
Oil filter element cover bolt
10 Nm (1.0 m · kg, 7.2 ft · lb)
2
3
1
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
T
R
.
.
19 Nm (1.9 m · kg, 13 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)