User Manual

20
Assembly
2
Attach the main unit of the glockenspiel to the legs.
The glockenspiel is heavy so make sure that two persons carry out the op-
eration.
Also, take care not to pinch your fingers between the glockenspiel and the legs.

CAUTION
2-1

Lock the caster stoppers on either side so that the legs do not move about during the assembly.
2-2

Align the holes (two holes on each side) located on the underside of the side frames with the
guide pins on the top of the legs and then place the glockenspiel main unit onto the legs.
* If the guide pins can not be aligned with the holes on the underside of the side frames, temporarily dis-
connect the leg stay and try again.
Side frame
Guide pin Side frame
Glockenspiel
Guide pin
Leg stay
Stopper
2-3

Use the fixing knobs (supplied) to secure the legs to the right and left side frames (two loca-
tions on the low register side and one location on the high register side).
Low register
side
Fixing knobs
Fixing knob
High register
side
Stopper
02_yg2500_en_new.indd 20 14/08/26 11:25