AV Receiver Owner's Manual • This unit is a product for enjoying video and music at home. • This manual explains preparations and operations for everyday users of the unit. • Read the supplied booklet “Quick Start Guide” before using the unit.
CONTENTS BEFORE USING THE UNIT 4 7 PLAYBACK Accessories................................................................................................ 4 How to use this manual............................................................................ 4 Enjoying playback................................................................................................................................................................. 25 Insert the batteries................................................
CONFIGURATIONS 41 Trademarks............................................................................................. 69 Specifications.......................................................................................... 70 Configuring various functions (Setup Menu)....................................... 41 Setup menu items................................................................................................................................................................. 42 Speaker...
BEFORE USING THE UNIT Accessories Remote control Check that the following accessories are supplied with the product. The supplied remote control is used as follows. £ FM antenna Insert the batteries £ Remote control £ Batteries (AAA, R03, UM-4) (x2) £ CD-ROM (Owner's Manual) Insert the batteries the right way round. £ Quick Start Guide * One of the above is supplied depending on the region of purchase.
FEATURES What you can do with the unit The unit is equipped with full of useful functions. Supports 2- to 5.1-channel speaker system The ECO mode (power saving function) allows you to create an eco-friendly home theater system You can enjoy your favorite acoustic spaces in various styles. When the ECO mode is enabled, you can reduce the unit's power consumption. • “ECO Mode” (p.
Surround playback with 5 speakers placed in front Useful applications You can enjoy the surround sound even when the surround speakers are placed in front. The useful application for connections and operations of the unit is as follows. n Application for tablets “AV SETUP GUIDE” • “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.
Part names and functions The part names and functions of the unit and the supplied remote control are as follows. Front panel 1 2 3 4 INFO 5 6 PRESET TUNING MEMORY 7 8 FM MODE 9 MUTE VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL CD TV RADIO STRAIGHT PROGRAM SILENT CINEMA 0 1 z (power) key Turns on/off (standby) the unit. 2 Remote control sensor Receives remote control signals (p.4). 3 INFO key Selects the information displayed on the front display (p.25).
Front display (indicators) 1 2 4 5 6 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A - DRC LINK MASTER OUT 3 2 ECO VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR 7 9 8 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being output. 2 CINEMA DSP Lights up when CINEMA DSP (p.28) is working. 3 SLEEP Lights up when the sleep timer is on. 4 STEREO Lights up when the unit is receiving a stereo FM radio signal.
Rear panel 2 1 3 4 SUB WOOFER 5 ▪ The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. 1 HDMI OUT jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.17). When using ARC, TV audio signal can also be input through the HDMI OUT jack. 6 7 7 SPEAKERS terminals For connecting to speakers (p.15).
Remote control 1 1 Remote control signal transmitter 2 BD DVD TV STRAIGHT 5 CD RADIO ENHANCER BASS Pressing this key repeatedly will specify the time (120 min, 90 min, 60 min, 30 min, off), in which the unit switches to the standby mode. PROGRAM INPUT E DISPLAY key 3 SLEEP key 4 SCENE keys Select the registered input source and sound program with one touch. Also, turn on the unit when it is in standby mode (p.26). FM 6 Displays the option menu (p.37). Turns on/off (standby) the unit.
PREPARATIONS General setup procedure 1 Placing speakers................................................................................................................................ (p.12) 2 Connecting speakers........................................................................................................................ (p.15) 3 Connecting a TV/playback devices.................................................................................................. (p.17) 4 Connecting the FM antenna.....
1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. Notice ▪ Use speakers with an impedance of at least 6 W. ▪ Be sure to connect the front left and right speakers.
Typical speaker layouts n 5.1-channel system n 5.1-channel system (Virtual CINEMA FRONT) We recommend this speaker layout which can maximize the performance of the unit. We recommend this speaker layout when the speakers can't be placed in back of the room. 1 1 2 2 4 9 9 3 4 5 10° to 30° Speaker type Front (L/R) Center Surround (L/R) Subwoofer 5 3 Abbr. 1/2 3 4/5 9 10° to 30° Speaker type Function Produce front left/right channel sounds (stereo sounds).
Other speaker layouts The following speaker layouts are also available. n 3.1-channel system n 2.
2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for a 5.1-channel system as an example. For other systems, connect speakers while referring to the connection diagram for the 5.1-channel system. Notice ▪ Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers. ▪ The speaker has the polarity (+/-).
n Connecting center/surround speakers and a subwoofer Connecting speaker cables 1 Speaker cables have two wires. One is for connecting the negative (-) terminals of the unit and the speaker to each other, and the other is for the positive (+) terminals. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal.
3 Connecting a TV/playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. Input/output jacks and cables n Video/audio jacks n Audio jacks AUDIO jacks (Stereo L/R jacks) OPTICAL jack Transmit digital audio signals. Use a digital optical cable. If there is a protective cap on the tip of the cable, remove it before using the cable.
Connecting a TV Connecting video devices (such as BD/DVD players) Connect the TV to the unit with an HDMI cable and a digital optical cable. Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack.
n Changing the combination of video/audio input jacks 3 If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. You can connect a video device that has the following video/audio output jacks. Output jacks on video device Video HDMI Press OPTION.
Connecting audio devices (such as CD players) 4 Connecting the FM antenna Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Audio output jacks on audio device Connect the supplied FM antenna to the unit. Fix the end of the FM antenna to a wall.
5 Connecting the power cable Warning (Brazil and General models only) Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard. Before connecting the power cable Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110– 120/220–240 V, 50/60 Hz.
6 Selecting an on-screen menu language Select the desired on-screen menu language. 1 2 6 Press z (receiver power) to turn on the unit. Note The information on the front display is provided in English only. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. 3 4 5 To exit from the menu, press SETUP.
7 Configure the speaker settings 1 2 3 4 5 Press RECEIVER z to turn on the unit. Configure the output characteristics of the speakers. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). 1 2 Press SETUP. 3 Use the cursor keys to select “Speaker” and press ENTER. Use the cursor keys to select “Configuration” and press ENTER. Use the cursor keys (q/w) to select an item and cursor keys (e/r) to select a setting. When setting is complete, press RETURN.
6 7 Set the distance between each speaker and listening position. 1 2 3 Use the cursor keys to select “Distance” and press ENTER. Use the cursor keys (q/w) to select speaker and cursor keys (e/r) to set distance. Adjust the volume of each speaker. 1 2 3 4 5 When setting is complete, press RETURN. Setting items Use the cursor keys to select “Test Tone” and press ENTER. Use the cursor keys (e/r) to select “On” to enable the test tone output and press RETURN.
PLAYBACK Basic playback procedure Enjoying playback Switching information on the front display 1 1 2 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. Press INFO repeatedly to select between the various display items. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER OUT Use the input selection keys to select an input source.
Selecting the input source and favorite settings with one touch (SCENE) The SCENE function allows you to select the assigned input source, sound program, and Compressed Music Enhancer on/off with just one touch. Registering a scene 1 Selecting a registered scene 1 ▪ Select an input source (p.25) Press SCENE. ▪ Select a sound program (p.27) or straight decode (p.30) The input source and settings registered to the corresponding scene are selected.
Selecting the sound mode I want to enjoy listening to compressed music. The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). • Enable Compressed Music Enhancer by pressing ENHANCER (p.31). This mode lets you enjoy listening to compressed music as it gives the music additional depth and breadth (p.31).
Enjoying sound field effects (CINEMA DSP) Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic. The sound effects and background music are reproduced with a gentle echo that does not impinge on the articulation of the dialogue. You’ll never get tired listening for long periods.
n Sound programs suitable for music (MUSIC) n Sound programs suitable for stereo playback (STEREO) The following sound programs are optimized for listening to music sources. You can select stereo playback. Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.
n Playing back 2-channel sources in multichannel Enjoying unprocessed playback (surround decoder) You can play back input sources without any sound field effect processing. The surround decoder enables unprocessed multichannel playback from 2-channel sources. When a multichannel source is input, it works the same way as the straight decode mode.
Enhancing the bass (Extra Bass) Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer) Extra Bass allows you to enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. 1 Press BASS. Each time you press the key, Extra Bass is enabled or disabled.
Listening to FM radio You can tune into a radio station by specifying its frequency or selecting from registered radio stations. 4 5 Note ▪ The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. ▪ If you cannot obtain good reception on the radio, adjust the direction of the FM antennas.
2 Registering favorite radio stations (presets) Press TUNING repeatedly to set a frequency. You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. Hold down the key for about a second to search stations automatically.
4 n Registering a radio station manually To start the Auto Preset process, press ENTER. Select a radio station manually and register it to a preset number. “SEARCH” appears during Auto Preset OUT 1 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER 2 ECO 01:FM 87.50MHz VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR 2 Preset number from which to start the registration Follow “Selecting a frequency for reception” (p.32) to tune into the desired radio station.
n Selecting a preset station n Clearing preset stations Tune into a registered radio station by selecting its preset number. Clear radio stations registered to the preset numbers. 1 2 1 2 3 Press FM to select “TUNER” as the input source. Press PRESET repeatedly to select the desired radio station. SLEEP SCENE BD DVD TV STRAIGHT CD RADIO ENHANCER BASS PROGRAM Press FM to select “TUNER” as the input source. Press OPTION. Use the cursor keys to select “Preset” and press ENTER.
Radio Data System tuning n Receiving traffic information automatically (U.K. and Europe models only) When “TUNER” is selected as the input source, the unit automatically receives traffic information. To enable this function, follow the procedure below to set the traffic information station. Radio Data System is a data transmission system used by FM stations in many countries.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Option menu items Note ▪ Available items vary depending on the selected input source. Press OPTION. LINK MASTER OUT 2 ECO ▪ Text in parentheses denotes indicators on the front display. ▪ Default settings are underlined.
n Input Select (Input Select) n DSP/Surround (DSP/Surround) Switches the input source. Press ENTER to switch to the selected input source. Configures the sound field program and surround settings. DSP Level (DSP Level) n Tone Control (Tone Control) Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually. Adjusts the sound field effect level. Choices -6 dB to 0 dB to +3 dB (1 dB increments) Setting range Treble (Treble), Bass (Bass) Adaptive DRC (A.
n Volume Trim (Volume Trim) n Signal Info. (Signal Info.) Fine-adjusts volume difference between input sources or subwoofer volume. Displays information about the video/audio signal. Choices Input Trim (In.Trim) Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it.
n Video Out (Video Out) Selects a video to be output with the selected audio source. For example, you can watch the video while listening to the radio. Input sources AUDIO 1-5, TUNER Settings Off(Off) Does not output video. HDMI 1-4 Outputs video input through the corresponding video input jacks.
CONFIGURATIONS Configuring various functions (Setup Menu) You can configure the unit’s various function with the menu displayed on the TV screen. Note Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. 1 2 3 Press SETUP. Use the cursor keys to select a menu and press ENTER. Use the cursor keys to select an item and press ENTER.
Setup menu items Menu Item Configuration Speaker Function Selects whether or not a subwoofer is connected. Front Selects the size of the front speakers. p.44 Center Selects whether or not a center speaker is connected and its size. p.44 p.45 Surround Selects whether or not surround speakers are connected and their size. Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. p.45 Subwoofer Phase Sets the phase of the subwoofer. p.
Menu ECO Function Language Item Function Auto Power Standby Set the amount of time for the auto-standby function. Page p.51 ECO Mode Enables/disables the eco mode (power saving mode). p.51 Input Rename Changes the input source name displayed on the front display. p.52 Input Skip Set which input source is skipped when operating the INPUT key. p.53 Dimmer Adjusts the brightness of the front display. p.53 Memory Guard Prevents accidental changes to the settings. p.
Speaker Configures the speaker settings manually. Front Note Selects the size of the front speakers. Default settings are underlined. Settings n Configuration Select this option for small speakers. Small Configures the output characteristics of the speakers. Note Select this option for large speakers. When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6‑1/4”) or larger, or “Small” if it is smaller than 16 cm (6‑1/4”).
Surround Extra Bass Selects whether or not surround speakers are connected and their sizes. Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Settings Select this option for small speakers. Small Large Settings The subwoofer or front speakers will produce surround channel lowfrequency components (configurable in “Crossover”). Off Disables Extra Bass.
n Distance n Equalizer Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. Adjusts the tone with an equalizer. EQ Select Choices Selects the type of equalizer to be used. Front L, Front R, Center, Surround L, Surround R, Subwoofer Settings Setting range 0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.
HDMI Configures the HDMI settings. n 4K Upscaling Note Enables/disables the upscaling function. When it is enabled, 1080p content is displayed at 4K resolution. Default settings are underlined. Settings n HDMI Control Enables/disables HDMI Control (p.66). Settings Off Note Settings To use HDMI control, you need to perform the HDMI Control link setup (p.66) after connecting HDMI Control-compatible devices.
n Standby Sync n SCENE Select whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control” is set to “On”. Enables/disable SCENE link playback when “HDMI Control” is set to “On”. When SCENE link playback is enabled, HDMI Control-compatible devices connected to the unit via HDMI automatically works as follows, with a scene selection. Settings Off Does not set the unit to standby mode when the TV is turned off.
Sound Configures the audio output settings. n Lipsync Note Adjusts the delay between video and audio output. Default settings are underlined. Note You can enable/disable the Lipsync function by input sources in “Lipsync (Lipsync)” (p.39) in the “Option” menu. n DSP Parameter Configures the surround decoder settings. Select Panorama Selects the method to adjust the delay between video and audio output. Enables/disables the broadening effect of the front sound field.
n Dialogue Max Volume Adjusts the volume of dialogue sounds. Sets the limit value of the volume. Setting range Dialogue Level -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [50.0 to 95.0 (5.0 increments), 97.0] Adjusts the volume of the center orientation sounds such as dialogue. Setting range Initial Volume 0 to 3 (higher to strengthen) Sets the initial volume when the receiver is turned on. n Volume Settings Configures the volume settings.
ECO Configures the power supply settings. Note Default settings are underlined. n Auto Power Standby Set the amount of time for the auto-standby function. Settings Off Does not set the unit to standby mode automatically. 20 minutes Sets the unit to standby mode when you have not operated the unit and the unit has not detected any input signal for the specified time. 2 hours, 4 hours, 8 hours, 12 hours Sets the unit to standby mode when you have not operated the unit for the specified time. Default U.
Function Configures the functions that make the unit easier to use. Procedure to rename manually Note Default settings are underlined. 1 n Input Rename 2 Changes the input source name displayed on the front display. You can also select a name created by the Auto Rename function. 3 Default HDMI 1-4: Auto ▪ To cancel the entry, select “CANCEL”. Procedure to rename automatically ▪ If you select "RESET", the default input name will be inserted into the editing area.
n Input Skip n Remote Color Key Set which input source is skipped when operating the INPUT key. Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. You can select the desired input source quickly by using this function. Settings Input sources Default HDMI 1–4, AUDIO 1–5, TUNER Assigns the functions of playback devices connected to the unit with an HDMI cable. Assigns the unit's input sources to each key. The assigned input sources can be set separately.
Language Select an on-screen menu language. Note Default settings are underlined. Settings English English 日本語 Japanese Français French Deutsch German Español Spanish Русский Russian Italiano Italian 中文 Chinese Note The information on the front display is provided in English only.
Configuring the system settings (ADVANCED SETUP menu) Configure the system settings of the unit while viewing the front display. 1 2 ADVANCED SETUP menu items Set the unit to standby mode. Note Default settings are underlined. While holding down STRAIGHT on the front panel, press z (power). z (power) Item Function REMOTE ID Selects the unit’s remote control ID. (Asia and General models only) TU PROGRAM 3 4 5 STRAIGHT Press PROGRAM to select an item.
Changing the FM tuning frequency setting (TU) Selecting the HDMI 4K signal format (4K MODE) (Asia and General models only) LINK MASTER OUT 2 ECO LINK MASTER OUT TU••••••••FM50 2 ECO VOL. MUTE VIRTUAL Change the FM tuning frequency setting of the unit depending on your country or region. Select this when you want to adjust the FM frequency by 100-kHz steps. Select this when you want to adjust the FM frequency by 50-kHz steps. OUT 2 ECO Inputs/outputs 4K signals shown in the table below.
Restoring the default settings (INIT) LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC INIT••••CANCEL VOL. MUTE VIRTUAL FPR FPL SL SW SR SBL SB SBR Restores the default settings for the unit. Choices ALL Restores the default settings for the unit. CANCEL Does not perform an initialization. Checking the firmware version (VERSION) LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VERSION••xx.xx VOL.
APPENDIX Frequently asked questions The unit’s remote control is simultaneously controlling another Yamaha product as well as the unit... The frequently asked questions from customers and the answers are shown below. The new speaker system does not provide an ideal sound balance... If you have changed speakers or have a new speaker system, reconfigure the speaker settings in “Speaker” in the “Setup” menu. We want to set limitations on the volume control...
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: 1 2 3 The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Problem The unit cannot be controlled using the remote control. Cannot select the desired input source even if “INPUT” is pressed. The RED/GREEN/YELLOW/BLUE keys of the remote control do not operate. Cause Remedy The unit is out of the operating range. Use the remote control within the operating range (p.4). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit.
Problem Cause Remedy The playback source does not contain Low Frequency Effect (LFE) To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the or low-frequency signals. front channel low-frequency components from the subwoofer (p.45). No sound is coming from the subwoofer. Subwoofer output is disabled. Set “Subwoofer” in the “Setup” menu to “Use” (p.44). The volume of the subwoofer is too low. Adjust the volume on the subwoofer.
Video Problem No video. No video from the playback device (connected to the unit with HDMI). No image (contents required the HDCP 2.2 compatible HDMI device) from the playback device connected to the unit with HDMI. The menu of the unit is not displayed on the TV. Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Another input source is selected on the TV. Switch the TV input to display the video from the unit.
Error indications on the front display Refer to the table below when the error message is indicated on the front display. Message Cause Remedy Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly. Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center. RemID Mismatch The remote control IDs of the unit and the remote control are not identical.
Glossary This is a glossary of the technical terms used in this manual. HDMI and video information Audio information Deep Color Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits.
Yamaha technologies CINEMA DSP (Digital Sound Field Processor) Since the surround sound systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear.
Information on HDMI (Example) The additional information on HDMI is as follows. HDMI Control HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable.
3 8 Use the cursor keys to select “HDMI” and press ENTER. Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. Note ▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work properly if the number of connected devices exceeds the limit.
Audio Return Channel (ARC) HDMI signal compatibility ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. Check the following after the HDMI Control settings. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device.
Trademarks The trademarks used in this manual are as follows. Google Noto Fonts This product uses the following fonts. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Copyright © June 2015, Google (https://www.google.com/get/noto/#sans-lgc), with Reserved Font Name Noto Sans Version 1.004. Copyright © June 2015, Google (https://www.google.com/get/noto/help/cjk/), with Reserved Font Name Noto Sans CJK Version 1.004.
Specifications The specifications of this unit are as follows. HDMI Input jacks HDMI Features: • 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, 21:9 Aspect Ratio, BT.
Compatible Decoding Formats Dynamic Power (IHF) • [Canada model] Decoding Format • Dolby Digital Plus • Dolby Digital • DTS – Front L/R (8/6/4/2 Ω) 110/130/160/180 W • [Other models] – Front L/R (6/4/2 Ω) Post Decoding Format • Dolby Pro Logic • Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game Damping Factor Audio Section Input Sensitivity / Input Impedance • Front L/R, 20 Hz to 20 kHz, 8 Ω • AUDIO 4 etc.
Tone Control Characteristics • Bass Boost/Cut • Bass Turnover • Treble Boost/Cut • Treble Turnover Power Consumption ±6 dB/0.5 dB Step at 50 Hz 240 W 350 Hz Standby Power Consumption ±6 dB/0.5 dB Step at 20 kHz 3.5 kHz • HDMI Control Off 0.4 W • HDMI Control On (No Signals) 1.0 W Filter Characteristics Dimensions (W x H x D) (fc=40/60/80/90/100/110/120/160/200 Hz) • H.P.F. (Front, Center, Surround) 12 dB/oct. • L.P.F. (Subwoofer) 24 dB/oct.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.