User Manual

ManualsBrandsYamaha ManualsHome AudioYHT-1A

Listening to FM radio

You can tune into a radio station by specifying its frequency or selecting from

registered radio stations.

Note

▪ The radio frequencies differ depending on the country or region where the unit is being used. The

explanation of this section uses a display with frequencies used in U.K. and Europe models.

▪ If you cannot obtain good reception on the radio, adjust the direction of the FM antennas.

Setting the frequency steps

(Asia, Brazil and General models only)

At the factory, the frequency step setting is set to 50 kHz for FM. Depending on your

country or region, set the frequency steps to 100 kHz for FM.

Set the unit to standby mode.

When holding down STRAIGHT on the front panel, press z

(power).

(power)

STRAIGHTPROGRAM

Press PROGRAM repeatedly to select “TU”.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRT UAL

TU••••••••FM50

Press STRAIGHT to select “FM100”.

Press z (power) to set the unit to standby mode and turn it on

again.

Selecting a frequency for reception

Press FM to select “TUNER” as the input source.

“TUNER” is selected as the input source and then the frequency currently

selected is displayed.