User Manual

Setup menu items
Menu Item Function Page
Speaker
Configuration
Subwoofer
Selects whether or not a subwoofer is connected. p.44
Front
Selects the size of the front speakers. p.44
Center
Selects whether or not a center speaker is connected and its size. p.44
Surround
Selects whether or not surround speakers are connected and their size. p.45
Crossover
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. p.45
Subwoofer Phase
Sets the phase of the subwoofer. p.45
Extra Bass
Enables/disables Extra Bass. p.45
Virtual CINEMA FRONT
Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. p.45
Distance
Sets the distance between each speaker and listening position. p.46
Level
Adjusts the volume of each speaker. p.46
Equalizer
Adjusts the tone with an equalizer. p.46
Test Tone
Enables/disables the test tone output. p.46
HDMI
HDMI Control
Enables/disables HDMI Control. p.47
Audio Output
Enables/disables the audio output from a TV. p.47
4K Upscaling
Enables/disables the upscaling function. p.47
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input. p.47
Standby Sync
Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.48
ARC
Enables/disables ARC. p.48
SCENE
Enables/disables SCENE link playback. p.48
Sound
DSP Parameter
Panorama
Enables/disables the broadening effect of the front sound field. p.49
Center Width
Adjusts the broadening effect of the center sound field. p.49
Dimension
Adjusts the difference in level between the front and surround sound fields. p.49
Lipsync
Select
Selects the method to adjust the delay between video and audio output. p.49
Adjustment
Adjusts the delay between video and audio output manually. p.49
Dialogue Dialogue Level
Adjusts the volume of dialogue sounds. p.50
Volume
Scale
Switches the scale of the volume display. p.50
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.50
Max Volume
Sets the limit value of the volume. p.50
Initial Volume
Sets the initial volume for when this receiver is turned on. p.50
En
42