User Manual

Configuring the system settings (ADVANCED SETUP menu)
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
(power)
z
STRAIGHTPROGRAM
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on
again.
The new settings take effect.
ADVANCED SETUP menu items
Note
Default settings are underlined.
Item Function Page
REMOTE ID Selects the unit’s remote control ID. p.55
TU
(Asia and General models only)
Changes the FM tuning frequency setting.
p.56
TV FORMAT Switches the video signal type of HDMI output. p.56
4K MODE Selects the HDMI 4K signal format. p.56
INIT Restores the default settings. p.57
VERSION Checks the version of firmware currently installed on the unit. p.57
Selecting the remote control ID (REMOTE ID)
ENHANCER
LINK
ECO
MASTER
OUT 2
-
R es Hi YPAO VOL. A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL SW SR
SBL SB SBR
FPL
MUT E VIRT UAL
REMOTE ID••ID1
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
n
Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (e), hold down
SCENE (BD/DVD) for more than 3 seconds.
To select ID2, while holding down the cursor key (e), hold down
SCENE (TV) for more than 3 seconds.
En
55