UC English Français Home Theater Package Pack Numérique Home Cinéma YHT-494 (HTR-3063 + NS-BR300 + NS-B285 + NS-SW280) Owner’s Manual Mode d’emploi
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols 1. 2. 3. 4. 5. 6. 7. 8. 9.
Precautions 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install the speakers in a cool, dry, clean place – away from windows, sources of heat, sources of excessive vibration, dust, moisture or cold. Avoid sources of electrical humming (e.g., transformers and motors). To prevent fire or electric shock, do not expose the speakers to rain or water. 3.
Precautions This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. In this state, this unit is designed to consume a very small quantity of power. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.
Contents Using the subwoofer............................................6 Wall-mounting the speakers ..............................7 Troubleshooting ...................................................8 Specifications........................................................8 Thank you for choosing the Yamaha YHT-494 Home Theater Package. The Yamaha YHT-494 Home Theater Package includes everything you need to add great sound to your home theater.
Connecting the speakers and antennas 1 Preparing the cables and speakers Once you’ve positioned the speakers, you’ll need to cut the 25meter (82 ft.) speaker cable to make three cables for connecting the front/center speaker and two cables for the surround speakers. 1 Cut the included speaker cable to suitable lengths for the front/center speaker and surround speakers. You need five cables.
Connecting the speakers and antennas Caution: Disconnect all components from AC outlets before proceeding.
Connecting AV components Caution: Disconnect all components from AC outlets before proceeding. 1 2 Connecting HDMI-capable components If your TV and DVD player or satellite/cable set-top box have HDMI jacks, you can connect them via the AV Receiver. Using HDMI cables (not included), connect the AV Receiver’s HDMI OUT jack to an HDMI input on your TV, and connect your DVD player and satellite/cable set-top box to the AV Receiver’s HDMI 1(BD/DVD) and HDMI 2 jacks, respectively, as shown.
Connecting AV components AV Receiver CD player SURROUND ANTENNA (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 FM GND AM COMPONENT VIDEO PR PR PB PB SPEAKERS FRONT SURROUND Y MONITOR OUT Y COMPONENT VIDEO OPTICAL AV 1 AV 2 COAXIAL CENTER MONITOR OUT VIDEO COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV OUT AV 5 AUDIO 1 AUDIO 2 AUDIO OUT SUBWOOFER Y COMPONENT VIDEO VIDEO COAXIAL OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 • Connect the AV Receive
Using the subwoofer 2 Setting the subwoofer volume 1 The very first time you use the subwoofer, you need to set the volume balance between the subwoofer and the front speakers as follows. 3 1 Turn on your other AV components. 2 Set the subwoofer’s VOLUME control to minimum (0). 4 3 Set the subwoofer’s POWER switch to ON. The power indicator on the rear panel lights up. 4 Play an audio source that contains low-frequency bass sounds. Set the amplifier’s volume control to a suitable level.
Wall-mounting the speakers 3 Hang the speaker by its keyhole slots onto the Unless you are very competent at DIY, do not wall-mount the speaker yourself. Ask your dealer or a qualified contractor to do the installation for you. Incorrect installation may cause the speaker to fall, causing damage or injury. protruding screws. Note • Make sure the shaft of each screw is seated in the narrow part of each keyhole slot. Otherwise, the speaker may fall.
Troubleshooting If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service center. Issue Possible cause Remedy There’s no sound. The speaker cables are not connected properly. Make sure the speaker cables are connected properly. The sound is very quiet.
