User Manual

Setting the equalizer

Selects the type of equalizer to adjust the tone.

Setup menu

“Speaker” > “Equalizer” > “EQ Select”

Settings

GEQ Adjusts the equalizer manually.

YPAO:Flat Adjusts each speaker to achieve the same characteristics.

YPAO:Front Adjusts each speaker to achieve the same characteristics as the front speakers.

YPAO:Natural Adjusts each speaker to achieve the same characteristics with lowered high frequency range.

Off Does not use the equalizer.

When selecting “GEQ”

1 Select “Channel” and then select the desired speaker channel.

2 Select the desired band (frequency) and adjust the gain.

Setting range

-6.0 dB to +6.0 dB

3 Press SETUP.

This completes the settings.

NOTE

(

Test tone output helps you to adjust the equalizer while confirming its effect

(

“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the YPAO has been performed.