UAL Home Theater Package (Subwoofer Integrated Receiver + Speaker) YHT-S400 (SR-300 + NS-BR300) For further information, refer to “Owner’s Manual” in the supplied CD-ROM. To use the CD-ROM, click on “English” in the screen displayed automatically when you insert the CD-ROM into your PC. Then follow the on-screen instructions. If the screen is not displayed automatically, open the “index.html” in the CD-ROM. Caution: Do not attempt to play this CD-ROM on an audio CD player.
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Contents UNPACKING & PLACEMENT UNPACKING & PLACEMENT Unpacking : Check the supplied units and accessories................................................................2 Installing the batteries ...................................................................................................................2 Placing ..............................................................................................................................................3 Placing the speaker...........................
UNPACKING & PLACEMENT Unpacking : Check the supplied units and accessories This product consists of the following items. Before making connections, make sure you have received all of the following items. ■ Units Subwoofer Integrated Receiver (SR-300) Speaker (NS-BR300) ■ Accessories Speaker cable (3 m) Remote control Indoor FM antenna (U.S.A.
Placing To enjoy quality sound thoroughly, place this system in the appropriate positions, and install the components properly. The following illustrations are the setting images of this system. 1 Example 2: Mounting the speaker on the wall (Refer to Owner’s Manual for details.
CONNECTION Connection • Do not connect the power cable until all connections are completed. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal. Overview Follow the procedure below to connect the subwoofer integrated receiver and the external components. Indoor FM antenna (supplied) y Twist and pull off the insulation tube on the lead wire. Insert into the terminal by matching the wire color with the color-coded terminal on the rear panel.
Connection Connecting a TV If a DVD player, etc., is connected to one of the HDMI IN jacks, connect your TV or video monitor (projector, etc.) to the HDMI OUT jack of the subwoofer integrated receiver. To output the sound of a TV from this system, you can select optical digital input and connect to digital output jack. TV CONNECTION Signal flow y For analog connection, you need to connect an audio cable to the analog input terminal.
PLAYBACK Basic playback operation Once you have finished all cable connections and remote control operation, follow the procedure below to start basic playback operation. 1 2 2 Press one of the input buttons to select an input source. 3 Start playback on the selected external component. For information on the external component, refer to the instruction manual for the product. 4 Press VOLUME +/– to adjust the volume level. y To turn off the volume temporarily, press MUTE.
Enjoying sound modes STEREO MODE UNIVOLUME SURROUND MODE Surround mode Stereo mode You can enjoy a realistic sound effect using Yamaha’s exclusive AIR SURROUND XTREME. An extended sound is achieved for a 2 channel source such as a CD player. Press SURROUND MODE to set surround mode. Press STEREO MODE to enter extended stereo mode. Press SURROUND MODE repeatedly until desired mode appears in the front panel display.
Listening to FM broadcasts Basic tuning operation FM INFO Sets the input to FM. Selects the information displayed in the front panel display. MEMORY Stores preset stations manually. PRESET / Select the preset FM stations. TUNING / Press to change the frequency by 1 step, or press and hold to search stations automatically. Cursor in OPTION menu RETURN OPTION Returns to the previous menu or cancels the operation. Enters OPTION menu when the input is set to FM.
ADDITIONAL INFORMATION For other features See Owner’s Manual in the supplied CD-ROM about the features as below. Contents Placing/ Connection About Attaching the speaker to a wall Page in Owner’s Manual ☞ P. 11 ☞ P. 17 ☞ P. 18 ☞ P. 19 ☞ P. 21 ☞ P.
Printed in Malaysia WT51050