Specifications

Using the Waterproof Housing
1. Opening The Latch 2. Insert Camera
Per arrow in the graphic below, pull Open hinged rear cover and insert camera
latch "A" outward and the clasp "B" as shown in the graphic below.
will slacken and allow you to pull lock
mechanism away from the rear cover.
3. Close the Cover
Per graphic to the right, First close
the clasp "B" and then press inwards
the latch "A" to lock tight
Two button operation only when camera is
Inside the waterproof housing
Note! The waterproof housing is certified at a
maximum depth of 30 Meters (99 feet). Should an
area of condensation form on the inside the
waterproof housing this will not cause a
problem for the cameras safe function. .
Page 5