User Manual
24
Tuning
Since changes in temperature and humidity have an eect on the instrument’s pitch, blow some air through the instrument to warm it up before tuning.
1.
Check the position of the tone reector.
As slippage in the tone reector’s position can eect the instru-
ment’s intonation, its position should be checked periodically.
Checking the position
Using the supplied cleaning rod accessory, insert it into the head-
joint and make sure that the line on the cleaning rod is centered
in the embouchure hole.
Should it be o center, either right or left, follow the instruc-
tions given on the next page to properly position the tone
reector.
Piccolo Alto Flute
Flute Bass Flute
Tone reector
Cleaning rod
7.5mm
Tone reector
Cleaning rod
26mm
Tone reector
Cleaning rod
17mm
Tone reector
Cleaning rod
40mm
Line on the cleaning rod