Owner’s Manual EN
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injur y or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Water warning • Only use the voltage specified as correct for the instrument.
• Before moving the instrument, remove all connected adaptor and other cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
Congratulations and thank you for purchasing the Yamaha PSR-E313/YPT-310 PORTATONE! Please read this owner’s manual carefully before using the instrument in order to take full advantage of its various features. Make sure to keep this manual in a safe and handy place even after you finish reading, and refer to it often when you need to better understand an operation or function.
Contents Formats and functions ............................................... 6 Supplied Accessories................................................. 6 Setting Up 8 Power Requirements ................................................. 8 Connecting headphones (PHONES/OUTPUT Jack) . 9 Connecting a footswitch (SUSTAIN Jack) ................. 9 Using the MIDI Terminals .......................................... 9 Turn on the power......................................................
Setting Up Be sure to do the following operations BEFORE turning on the power. Power Requirements Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. ■ Using an AC Power Adaptor q Make sure that the power of the instrument is off (the backlit display is off).
Setting Up Make all necessary connections BEFORE turning the power on. Using the MIDI Terminals Connecting headphones (PHONES/OUTPUT Jack) The PSR-E313/YPT-310 speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device.
Panel Controls and Terminals ■ Front Panel q [STANDBY/ON] switch ....................................page 9, 32 w [MASTER VOLUME] control ......................... pages 9, 32 When the lesson mode e LESSON PART [L] button .............................................................page 36 [R] button.............................................................page 36 When the recording mode e [REC TRACK 2] button........................................page 29 [REC TRACK 1] button...........................
Panel Controls and Terminals Music Database List (page 80) Display (page 34) Voice List (page 70) !2 t 001 GrandPno 001 y !9 !1 u r i o !3 !0 @1 @0 001 @2 @3 @4 @5 @6 @7 GrandPno 001 @8 ■ Rear Panel @9 #0 #1 #2 PSR-E313/YPT-310 Owner’s Manual 11
Step — Quick Guide — 1 Changing the Voices Try playing a variety of instrument Voices In addition to the piano Voice, a wide variety of other instrument Voices can be selected and played, including guitar, trumpet and flute. The Voice selected here becomes the Main Voice. 1 Press the [VOICE] button. The Voice number and name are displayed. Voice number 001 Voice name GrandPno 001 2 Select a Voice. Select the desired Voice by using the number buttons [0]–[9], [+], [-].
Playing Two Voices Simultaneously—Dual Quick Guide You can select a second Voice which will play in addition to the Main Voice selected on the previous page. This second Voice is known as the Dual Voice. Two Voices sound at the same time Play the Dual Voice Step 1 Changing the Voices Press the [DUAL ON/OFF] button to turn the Dual function on. When Dual is on, you can play a Dual Voice in a layer with the Main Voice.
Playing Different Voices with the Left and Right Hands—Split In the Split mode you can play different Voices to the left and right of the keyboard “Split Point.” The main and Dual Voices can be played to the right of the Split Point, while the Voice played to the left of the Split Point is known as the “Split Voice” Split Point Main Voice and Dual Voice Split Voice Play the Split Voice Press the [SPLIT ON/OFF] button to turn the Split function on.
Playing the Grand Piano Voice Quick Guide When you simply want to play a piano Voice, all you have to do is press one convenient button. Press the [PORTABLE GRAND] button. Step 1 Changing the Voices The Voice “Grand Piano 001” will automatically be selected as the Main Voice. Drum kits Drum kits are collections of drum and percussion instruments. When drum kits (Voice number 109–121) are selected, you can play different percussion sounds directly from the keyboard. 1 Press the [VOICE] button.
us h Br q h C us lic k H S Ta wir l p Sn Sw ir Sn are l Ba are Rol ss H l Ba Dr Sof ss um t So D ru m ft Ba Ha ss rd D ru m Sn Sna ar re e H M Fl H oo ar d r Fl Tom oo rT L om Lo H w M To id m T M om id L To C H mH hi ig n h R ese To id C m e C ym y Sp mb bal la al C C sh C up ra sh ym ba C y R id mb l e C al 2 ym ba C Bo l 2 on ng ga o H H M C ute on Ti ga m L ba l Ag e H og o Sa C H m ba ab Sa W asa h m ba istl W eH h G istle W uiro L oo L d on W Blo g oo ck d B H C loc ui ca k L Tr O ia ng pe
Step 2 — Quick Guide — Fun Sounds Press the [VOICE] button. 2 Select the Sound Effect kit. Select Voice number 121 by using the number buttons [0]–[9], [+], [-]. 121 3 Step 2 Fun Sounds 1 Quick Guide This instrument also includes a wide range of unique sound effects. Try out each key and enjoy the sounds! As you try out the various keys you’ll hear the sound of a dog barking, running water, a creaking door and many other unique effects. SE Kit Try out each key.
Step — Quick Guide — 3 Playing Songs Select and Listen to a Specific Song This instrument has 102 built-in Songs. Listening to a Song. 1 Press the [SONG] button. The Song number and name are displayed. Song number 001 Song name Appears when the Song mode is active. Cruisin 001 2 3 18 Select the desired Song by using the number buttons [0]–[9], [+], [-]. Refer to the Song List on next page. 001–102 Built in Songs (see next page) 103–107 User Songs (Songs you record yourself).
Quick Guide ● Other Operations [REW] button ........... Fast-reverses the Song if pressed during playback (no sound is heard during fast reverse). Decreases the measure number if pressed while playback is stopped. [FF] button................ Fast-forwards the Song if pressed during playback. Increases the measure number if pressed while playback is stopped. [PAUSE] button ........ Temporarily stops playback. Press this button a second time to resume playback from the point at which it was stopped.
Step — Quick Guide — 4 Play with a Style Selecting a rhythm of a Style The Style feature provides backing and rhythm parts in a wide variety of musical categories, including rock, blues, techno and much more. Here’s how to play a rhythm of a Style. The rhythm sound consists of percussion instruments. 1 Press the [STYLE] button. The Style number and name are displayed. Style number 001 Style name 8BtModrn Appears when the Style mode is active. 001 2 Select a Style.
Playing with a Style Press the [STYLE] button and then select a Style. Turn auto accompaniment on. Press the [ACMP ON/OFF] button. Press the [ACMP ON/OFF] button again to turn the auto accompaniment off. 001 Step 4 Play with a Style 1 2 Quick Guide On the previous page, you’ve learned how to select your favorite rhythm of a Style. Here, you’ll learn how to expand on that rhythm with bass and chord backing, and use all of it as your accompaniment as you play.
4 The Style will begin playing as soon as you play a chord in the accompaniment range of the keyboard. Not sure how to play chords? No problem! This instrument is capable of playing chords even if you only play one key. Try playing one, two or three keys (any notes will do) in the auto accompaniment range of the keyboard. Different keys will produce different results. Refer to page 55 for detailed instructions for playing chords.
5 — Quick Guide — Play Using the Music Database Quick Guide Step You want to play music in your favorite style, but you’re not sure how to select the best voice and style for the type of music you want to play ... simply select the appropriate style from the Music Database. The panel settings will automatically be adjusted for the ideal combination of sounds and style! Press the [MUSIC DATABASE] button.
Step — Quick Guide — 6 Play With The Metronome Start the metronome The instrument includes a metronome with adjustable tempo and time signature. Play and set the tempo that is most comfortable for you. Starting the metronome Turn the metronome on and start it by pressing the [METRONOME ON/ OFF] button. To stop the metronome, press the [METRONOME ON/OFF] button again. 001 GrandPno 1 1 Displays the current beat. Setting the metronome tempo 1 Press the [TEMPO/TAP] button to display the tempo.
Setting the Number of Beats per Measure, and the Length of Each Beat Press and hold the [METRONOME ON/OFF] button for longer than a second to select the number of beats per measure function “TimeSigN”. Number of beats per measure. 04 TimeSigN Hold for longer than a second. 2 Use the number buttons [0]–[9], [+], [-] to select the number of beats per measure. A chime will sound on the first beat of each measure while the other beats will click.
Setting the Metronome Volume 1 Press the [FUNCTION] button a number of times until “MetroVol” appears. 100 MetroVol Metronome Volume 2 26 Set the metronome volume by using the number buttons [0]–[9], [+], [-].
7 — Quick Guide — Record your own performance Quick Guide Step Recording Your Performance 1 Step 7 Record your own performance You can record up to five of your own performances as User Songs (User 1–5: Song numbers 103–107). Think of each User Song as a kind of basket or drawer for storing your recording. Remember that you can also record a Style (containing chord changes) along with your own performance. Press the [REC] button.
3 Stop recording. CAUTION Pressing the [START/STOP] button stops recording and writes the data to the User Song. (A “Writing!” message is shown.) To playback the newly recorded performance, press the [START/ STOP] button. ●In order to record with the Style, turn the Auto Accompaniment to on (see Steps 1–2 on page 21), and then record according to the instructions. (The “ACMP ON” lights.
Turn ACMP (auto accompaniment) on or off, depending on what you want to record. NOTE If you want to record Style playback, turn ACMP on. If you want to record only your own keyboard performance, turn ACMP off. 2 • Keep in mind that both Tracks 1 and 2 will be overwritten with new data if you record without specifying the tracks. Specify the track you want to record. Specify the track 2 when you want to record the Style.
Deleting User Songs Deleting an entire User Song NOTE • You cannot delete a specific track from a User Song. 1 Press the [SONG] button and select the User Song you want to delete by using the number buttons [0]–[9], [+], [-]. 103 2 User 1 Press and hold the [REC] button for longer than a second. The Song Delete display appears. YEs ClrUser1 Hold for longer than a second. You can cancel the delete operation by pressing the [-/NO] button. 3 Press the [+/YES] button.
Backup and Initialization Backup The following settings are always backed up, and are maintained even when the power is turned off. If you want to initialize the settings, use the Initialize operation as explained below. You can also save the settings as backup data to your computer, by using the Musicsoft Downloader (MSD) software. Refer to the section “Transferring a backup file from the PSRE313/YPT-310 to a computer” on page 68.
Basic Operation and Displays Basic Operation Turning the power on Turn down the volume by turning the [MASTER VOLUME] control to the left and press the [STANDBY/ON] switch to turn on the power. Press the [STANDBY/ON] switch again to turn the power OFF. Adjusting the volume Turn the [MASTER VOLUME] dial. Rotate clockwise to increase the volume. Rotate counterclockwise to lower the volume.
Basic Operation and Displays Press a button to select a basic function Press the [SONG] button to select a Song. Press the [STYLE] button to select a Style. When you select a basic function, the name and number of the currently selected Song, Style and Voice is shown. From this display, you can select the desired Song, Style or Voice. Press the [VOICE] button to select a Voice.
Basic Operation and Displays Display The Main display shows all of the current basic settings for Song, Style and Voice. It also includes a range of indicators that show the on/off status for various functions. Song/recording track display Notation Displays the melody and chord notes of a Song when the Song lesson function is in use, or the notes of chords you specify when the Dictionary function is in use. At other times the notes you play on the keyboard are displayed.
Song Lesson Yamaha Education Suite 5 You can select any Song you like and use it for a left-hand, right-hand, or both-hands lesson. Song Lesson lets you learn how to play Songs in three easy steps. Songs that can be used with the Lesson feature include Songs transferred from a computer to flash memory (SMF Format 0 only; see page 65). The procedure for transferring songs are described on page 67. ■ Lesson Flow Select a Song for your lesson. Select the part you want to practice. Select the practice method.
Song Lesson 2 Select the part you want to practice. Press the [R] button for a right-hand lesson, [L] button for a left-hand lesson, or press both the [R] and [L] buttons simultaneously for a bothhands lesson. The selected part is displayed. Left-hand lesson Right-hand lesson Left Right Both-hands lesson BothHand A “No LPart” message is shown in the display if you select the left part in one of the Songs 004–030, which do not have left part data.
Song Lesson Lesson 2 (Timing) In this lesson, try playing the notes with the correct timing. Simply concentrate on playing each note in time with the rhythmic accompaniment. The correct notes sound even if you play wrong notes as long as you play in time with the rhythm. 1 Select a Song for your lesson. • You cannot use Dual or Split Voices during lessons. • The Split Point is fixed and it cannot be changed.
Song Lesson Lesson 3 (Waiting) In this mode, try playing the correct notes. The notes you should play appear in the score and the keyboard on the display. The Song pauses until you play the right note. 1 Select a Song for your lesson. NOTE 2 Select the part you want to practice. 3 Start Lesson 3. Press the [WAITING] button to start Lesson 3. r3 WAITING Play the notes shown in the display. Try playing the correct notes. 4 38 Stop the Lesson mode.
Song settings Changing the Melody Voice You can change a Song’s melody Voice to any other Voice you prefer. NOTE • You cannot change the melody Voice of a User Song. 1 Select the Song and play it. Refer to the section “Playing Songs” on page 18. 2 Select a desired Voice by using the number buttons [0]– [9], [+], [-]. 004 HnkyTonk 001 The selected Voice sounds when you play the keyboard.
Song settings 2 Press the [FUNCTION] button a number of times until “SongVol” appears. Current Song Volume 100 3 Song Volume SongVol Set the Song Volume by pressing the number buttons [0]–[9], [+], [-]. NOTE • Press the [+] and [-] buttons simultaneously to instantly reset the value to its default setting (100). Mute You can mute Track 1 or Track 2 during Song playback. • Track 1 can be muted by pressing the [REC TRACK 1] button during Song playback.
Song settings Practice Makes Perfect You can repeatedly practice a section you find difficult. This function lets you specify a section of a Song you want to practice—“A” is the start point and “B” is the end point—for repeat playback. A B Repeat playback of this section 1 Play the Song and press the [A-B REPEAT] button at the beginning of the section you want to repeat (the “A” point). “A-REPEAT” will be displayed.
Play With a Variety of Effects Adding Harmony This feature adds harmony notes as well as tremolo or echo effects to the Main Voice. 1 Press the [HARMONY] button to turn harmony on. When you don’t want to add harmony notes, press the [HARMONY ON/OFF] button again to turn Harmony off. Appears when harmony is on. 2 Press and hold the [HARMONY ON/OFF] button for longer than a second. “HarmType” appears in the display for a few seconds, followed by the Harmony Type.
Play With a Variety of Effects NOTE ● How to sound each Harmony Type • Harmony type 01–05 • Harmony type 13–19 (Tremolo) Press the right-hand keys while playing chords in the auto accompaniment range of the keyboard when the Auto Accompaniment is on (page 21). Keep holding down the keys. • The harmony notes can be added only to the Main Voice, not to Dual or Split Voices. • The keys left of the Split Point of the keyboard produce no harmony notes when the auto accompaniment is on (ACMP ON is lit).
Play With a Variety of Effects 2 Select the desired Reverb Type by using the number buttons [0]–[9], [+], [-]. Refer to the Reverb Type list on page 81 for details. You can adjust the Reverb depth in the Function Settings (page 59). NOTE • You can also access the Reverb Type setting display by pressing the [FUNCTION] button several times. Adding Chorus This effect makes the Voice sound richer, warmer and more spacious.
Handy Performance Features Touch Response Sensitivity Touch Response Appears when Touch Response is on. NOTE • The Touch Response function cannot be used for some Voices (such as organ), even if the Touch Response icon appears in the display. Press the [TOUCH ON/OFF] button to turn Touch Response on. When Touch Response is on, you can control the volume of notes according to how hard you play the keys. Touch Response is normally on. Press the [TOUCH ON/OFF] button again to turn the Touch Response off.
Handy Performance Features Setting the Split Point The Split Point setting can be changed as desired. Split Point—default setting: 54 (F#2) 36 48 60 72 84 96 The initial default Split Point is key number 54 (the F#2 key), but you can change it to another key. When you change the Split Point, the auto accompaniment range also changes. 1 Press the [FUNCTION] button a number of times until “SplitPnt” appears.
Handy Performance Features Tuning You can fine tune the pitch of the entire instrument. The overall tuning of the instrument can be shifted up or down by a maximum of 100 cents in 1cent increments (100 cents = 1 semitone). 1 Press the [FUNCTION] button a number of times until “Tuning” appears. Currently tuning value 000 2 Tuning Use the number buttons [0]–[9], [+] and [-] to set the Tuning value between -100 and +100 as required.
Handy Performance Features Changing the tempo of the Song/Style Songs and Styles can be played at any tempo you desire—fast or slow. 1 Press the [TEMPO/TAP] button to call up the Tempo setting in the display after selecting a Style/Song. Current Tempo value 116 2 Tempo Set the Tempo by using the number buttons [0]–[9], [+], [-]. You can also set the Tempo by simply tapping the [TEMPO/TAP] button at the required tempo—four times for time signatures in 4, and three times for time signatures in 3.
Style (Auto Accompaniment) Functions Various ways to start and stop Style playback Starting Style playback The following three methods can be used to start Style playback. In all cases you will need to press the [ACMP ON/OFF] button to turn auto accompaniment on before actually starting Style playback. Whichever method you choose, you can press the [INTRO/ENDING/rit.] before starting playback.
Style (Auto Accompaniment) Functions Stopping Style playback The following three methods can be used to stop Style playback. ■ Immediate Stop Playback will stop as soon as you press the [START/STOP] button. Immediate Stop ■ Stop and Enter Sync Start Mode If you press the [SYNC START] button during Style playback, playback will stop immediately and the Sync Start standby mode will be engaged (beat arrows will flash).
Style (Auto Accompaniment) Functions Pattern Variation (Sections) The instrument features a wide variety of Style “sections” (patterns) that allow you to vary the arrangement of the accompaniment to match the Song you are playing. Intro Main A/B Ending Auto fill ● INTRO section This is used for the beginning of the Song When the intro finishes playing, accompaniment shifts to the main section. The length of the intro (in measures) differs depending on the selected Style.
Style (Auto Accompaniment) Functions 4 Press the [MAIN/AUTO FILL] button. MAIN A The name of the selected section—MAIN A or MAIN B—will be displayed 5 Press the [INTRO/ENDING/rit.] button. INTRO≥A 6 As soon as you play a chord with your left hand, the Intro of the selected Style starts. For this example, play a C major chord (as shown below). For information on how to enter chords, see “Playing Auto Accompaniment Chords” on page 55. Accompaniment range 7 Press the [MAIN/AUTO FILL] button.
Style (Auto Accompaniment) Functions Adjusting the Style Volume This procedure allows you to adjust the balance between Style playback and the notes you play on the keyboard by setting the volume of the playback sound. 1 2 Press the [STYLE] button. Press the [FUNCTION] button a number of times until the “StyleVol” appears. Current Style volume setting 100 3 Style Volume StyleVol Set the Style volume by using the number buttons [0]– [9], [+], [-].
Style (Auto Accompaniment) Functions Registering Style Files This instrument features 106 internal styles, but other styles, such as those which can be obtained from the internet (only styles with the “.sty” suffix), can be registered into style number 107 and used in the same way as the internal styles. In order to use the style file register function, the file must already have been transferred from the computer to the instrument.
Playing Auto Accompaniment Chords You’ve learned in the section “Play with a Style (Accompaniment)” on page 20 that the “feel” of the Style changes every time you play a chord on the left-hand side of the keyboard. Here, you’ll learn the types of the chords and how to play them in greater detail. The examples of chords are given here in the key of C.
Playing Auto Accompaniment Chords ● Recognized Standard Chords Chart Chord Name/[Abbreviation] Normal Voicing Major [M] 1-3-5 Chord (C) C Display C Add ninth [(9)] 1-2-3-5 C(9) C(9) Sixth [6] 1 - (3) - 5 - 6 C6 C6 Sixth ninth [6(9)] 1 - 2 - 3 - (5) - 6 C6(9) C6(9) * Major seventh [M7] 1 - 3 - (5) - 7 or 1 - (3) - 5 - 7 CM7 CM7 Major seventh ninth [M7(9)] 1 - 2 - 3 - (5) - 7 CM7(9) CM7(9) * CM7(#11) CM7(#11)* 1 - (2) - 3 - #4 - 5 - 7 or Major seventh add sharp eleventh [M7(#11)]
Playing Auto Accompaniment Chords Looking up Chords Using the Chord Dictionary The Dictionary function is essentially a built-in “chord dictionary” that shows you the individual notes of chords. It is ideal when you know the name of a certain chord and want to quickly learn how to play it. 1 Press and hold the [WAITING] button for longer than a second. “Dict.” will appear in the display. Dict. Hold for longer than a second. 2 As an example, we’ll learn how to play a GM7 (G major seventh) chord.
Playing Auto Accompaniment Chords ■ About chords Playing two or more notes together simultaneously creates a “chord.” Playing a note together with two other notes spaced three notes (steps) apart—such as the notes C, E and G—creates a harmonious sound. Chords like these are called “triads” and they play an important role in most music. 3rd Root 3rd Taking the chord above as an example, the lowest note of this triad is called the “root note.
Function Settings The [FUNCTION] button gives you access to a variety of operations related to adjusting or enhancing the sound and making settings for connection to external devices. Select the item and change the value There are 34 different items that can be set. 1 Press the [FUNCTION] button a number of times until desired item appears. Each time the [FUNCTION] button is pressed 34 function items are displayed in sequence.
Function Settings Item Range/settings Description D.Voice 001–482 Dual Voice Volume D.Volume 000–127 Determines the volume of the Dual Voice. Dual Voice Octave D.Octave -2–0–2 Determines the octave range for the Dual Voice. Dual Voice Chorus Send Level D.Chorus 000–127 Determines how much of the Dual Voice’s signal is sent to the Chorus effect. Split Voice S.Voice 001–482 Selects the Split Voice. Determines the volume of the Split Voice.
About MIDI The instrument features a MIDI terminals that can be connected to other MIDI instruments and devices for expanded musical functionality. What is MIDI? MIDI (Musical Instrument Digital Interface) is a world-standard interface for communication between electronic musical instruments and music devices.
About MIDI Transferring Performance Data To and From Another Instrument By connecting the PSR-E313/YPT-310 to other MIDI devices or a computer, the performance data of the instrument can be used on those other MIDI devices or computer, and also the performance data from other MIDI devices and computer can be received and sounded with the PSR-E313/YPT-310. ● When the instrument is connected with another MIDI device, it transmits/receives performance data.
About MIDI External Clock Settings These settings determine whether the instrument is synchronized to its own internal clock (OFF), or to a clock signal from an external device (ON). On......... The instrument’s time based functions will be synchronized to the clock from an external device connected to the MIDI terminal. Off ........ The instrument uses its own internal clock (default). You can set the External Clock in the Function Settings (page 59).
About MIDI Remote Control of MIDI Devices You can also use this instrument as a remote control device for the Digital Music Notebook application on your computer (via the MIDI connection) —controlling playback, stop and transport functions from the panel. ● Remote control keys PSR-E313/YPT-310: To use the remote control functions, simultaneously hold down the lowest two keys on the keyboard (C1 and C#1) and press the appropriate key (shown below).
About MIDI Transferring data between the PSR-E313/YPT-310 and a computer The PSR-E313/YPT-310 includes 102 preset Songs and 106 Styles, but you can load other Songs and Styles from your computer and use them in the same way as the preset Songs and Styles as long as the loaded Song is SMF format 0* or the loaded Style is SFF (Style File Format). Loaded Song data will be stored to Song numbers beginning with 108 and one of the loaded style/s can be registered as the 107th style.
About MIDI Connecting a personal computer After installing the Musicsoft Downloader application on your computer, connect the PSR-E313/YPT-310 as described below. A Yamaha UX16 or similar USB-MIDI interface (sold separately) will be necessary for MIDI connection between the PSR-E313/YPT-310 and a USB-equipped computer. Make sure to purchase a Yamaha UX16 or a quality USB-MIDI interface at a musical instrument store, computer store or electrical appliance store.
About MIDI Transferring a file from a computer You can transmit Song files and Style Files from your computer to the Flash Memory on your PSR-E313/YPT-310. For details about how to transmit Song file and Style File using the Musicsoft Downloader application, refer to the Online help topic “Transferring Data Between the Computer and Instrument (for unprotected data)” of the Musicsoft Downloader.
About MIDI Transferring a backup file from the PSR-E313/YPT-310 to a computer You can transfer backup data (page 31) to a computer as a “backup file” by using Musicsoft Downloader. For details about how to transmit backup files using the Musicsoft Downloader application, refer to the Online help topic “Transferring Data Between the Computer and Instrument (for unprotected data)” of the Musicsoft Downloader. NOTE • Preset Song data cannot be transmitted from the PSR-E313/YPT-310.
Troubleshooting Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When using a mobile phone, noise is produced. Using a mobile phone in close proximity to the instrument may produce interference. To prevent this, turn off the mobile phone or use it further away from the instrument.
Voice List ■ Maximum Polyphony • • • • • • • • • • • • • • • • • • • • • NOTE The instrument has 32-note maximum polyphony. This means that it can play a maximum of up to 32 notes at once, regardless of what functions are used. Auto accompaniment uses a number of the available notes, so when auto accompaniment is used the total number of available notes for playing on the keyboard is correspondingly reduced. The same applies to the Split Voice and Song functions.
Voice List Voice No. Bank Select MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) Voice Name SAXOPHONE Voice No.
Voice List ● XGlite Voice/XGlite Optional Voice* List Voice Name PIANO Voice Name 167 0 34 17 60’s Drawbar Organ 2 168 0 35 17 70’s Drawbar Organ 1 122 0 0 1 Grand Piano 169 0 37 17 60’s Drawbar Organ 3 123 0 1 1 Grand Piano KSP 170 0 40 17 16+2'2/3 124 0 40 1 Piano Strings 171 0 64 17 Organ Bass 0 65 17 70’s Drawbar Organ 2 Cheezy Organ 125 0 41 1 Dream 172 126 0 0 2 Bright Piano 173 0 66 17 127 0 1 2 Bright Piano KSP 174 0 67 17 Drawb
Voice List MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) Bank Select Voice No. MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) Bank Select Voice Name Voice No.
Voice List MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) Bank Select Voice No. Voice No.
Voice List MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) Bank Select Voice No. MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) Bank Select Voice Name Voice No.
Drum Kit List • “ ” indicates that the drum sound is the same as “Standard Kit 1”. • Each percussion voice uses one note. • The MIDI Note # and Note are actually one octave lower than keyboard Note # and Note. For example, in “109: Standard Kit 1”, the “Seq Click H” (Note# 36/Note C1) corresponds to (Note# 24/Note C0). • Key Off: Keys marked “O” stop sounding the instant they are released. • Voices with the same Alternate Note Number (*1 … 4) cannot be played simultaneously.
Drum Kit List C1 C#1 D1 E1 F1 D#1 F#1 G1 G#1 A1 B1 C2 A#1 C#2 D2 E2 F2 D#2 F#2 G2 G#2 A2 B2 C3 A#2 C#3 D3 E3 F3 D#3 F#3 G3 G#3 A3 B3 C4 A#3 C#4 D4 E4 F4 D#4 F#4 G4 G#4 A4 B4 C5 A#4 C#5 D5 E5 F5 D#5 F#5 G5 G#5 A5 B5 C6 A#5 Voice No.
Drum Kit List C1 C#1 D1 E1 F1 D#1 F#1 G1 G#1 A1 B1 C2 A#1 C#2 D2 E2 F2 D#2 F#2 G2 G#2 A2 B2 C3 A#2 C#3 D3 E3 F3 D#3 F#3 G3 G#3 A3 B3 C4 A#3 C#4 D4 E4 F4 D#4 F#4 G4 G#4 A4 B4 C5 A#4 C#5 D5 E5 F5 D#5 F#5 G5 G#5 A5 B5 C6 78 A#5 Voice No.
Style List Style No. Style Name Style No. 8 Beat Style Name Style No.
Music Database List MDB No. MDB Name MDB No. POP R&B MDB No.
Effect Type List ● Harmony Types No.
PSR-E313/YPT-310 Owner’s Manual Change Control 0,32 1 6 38 7,10 11 64 71,73,74 Key's Ch's After Touch Pitch Bend Note ON Note OFF Velocity o x x x o x o x x x x o 9nH,v=1-127 x *1 *1 *1 *1 *1 0 - 127 : True voice ************** 3 x ************** Default Messages Altered Mode Note Number 1 - 16 x Default Changed Transmitted o o o x o o o o o x x o 9nH,v=1-127 x 0 - 127 0 - 127 3 x x 1 - 16 x Recognized [ Portable Keyboard ] MIDI Implementation Chart Basic Channel Functi
: True # x x x x o x Mode 1 : OMNI ON , POLY Mode 3 : OMNI OFF, POLY *1 Refer to #2 on page 84. Aux :All Sound OFF :Reset All Cntrls :Local ON/OFF Mes- :All Notes OFF sages:Active Sense :Reset x x x o o o : Song Pos. : Song Sel.
MIDI Data Format NOTE: 1 By default (factory settings) the instrument ordinarily functions as a 16-channel multi-timbral tone generator, and incoming data does not affect the panel voices or panel settings. However, the MIDI messages listed below do affect the panel voices, auto accompaniment, and songs. • MIDI Master Tuning • System exclusive messages for changing the Reverb Type and Chorus Type. 2 Messages for these control change numbers cannot be transmitted from the instrument itself.
Specifications Keyboards • 61 standard-size keys (C1–C6), with Touch Response Display • LCD display (backlit) Setup • STANDBY/ON • MASTER VOLUME: MIN–MAX Panel Controls • [L]/[REC TRACK 2], [R]/[REC TRACK 1], [LISTEN & LEARN], [TIMING], [WAITING], [A-B REPEAT]/[ACMP ON/OFF], [REW]/[INTRO/ENDING/rit.
Index Panel Controls and Terminals Alphabetical Order A-B REPEAT button ................................................. 41 ACMP ON/OFF button .............................................. 21 DEMO button ............................................................. 19 DUAL ON/OFF button .............................................. 13 FF button .................................................................... 19 FUNCTION button ..............................................
Index I S Initial Send ................................................................. 60 Initialization ............................................................... 31 Intro ...................................................................... 49, 52 Save data to computer ................................................ 68 SMF Format 0 ............................................................ 65 Song ............................................................................ 18 Song List ....
Limited Warranty 90 DAYS LABOR 1 YEAR PARTS Yamaha Corporation of America, hereafter referred to as Yamaha, warrants to the original consumer of a product included in the categories listed below, that the product will be free of defects in materials and/or workmanship for the periods indicated.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
Yamaha Home Keyboards Home Page (English Only) http://music.yamaha.com/homekeyboard Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2007 Yamaha Corporation WH70550 XXXPOTYX.