User Manual

PSR-E343/YPT-340 Owner’s Manual
33
The Functions
The Functions settings provide access to a range of detailed instrument parameters
such as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
Each time the [FUNCTION] button is pressed, the
Function number increases one by one. You can
also decrease the Function number by one when
you press the [-] button briefly while holding
down the [FUNCTION] button.
After a few seconds, the Function name may be
replaced with the setting value depending on the
selected Function.
2
Set the value by using the number but-
tons [0]–[9], [+], [-].
• The Function number does not appear in the display
during Song, Style or metronome playback. The beat
value appears instead.
001
StyleVol
100
Current value
Function number
Function name
NOTE
• To exit the Function settings, press one of these buttons;
[SONG], [VOICE], [STYLE] or [GRAND PIANO].
Direct numeric
entry.
• Increment
value by 1.
•Yes
•On
Press simultaneously
to recall the default
setting.
• Decrement
value by 1.
•No
•Off
NOTE
Function List
Function
Number
Function name Display Range/Settings Default Value Descriptions
Vol ume
001 Style Volume StyleVol 000–127 100 Determines the volume of the Style. (page 17)
002 Song Volume SongVol 000–127 100 Determines the volume of the Song. (page 22)
003 AUX IN Volume AuxInVol 000–127 100
Determines the volume of the external audio device connected to
the instrument’s [AUX IN] jack. (page 25)
Overall
004 Transpose Transpos -12–12 0 Determines the pitch of the instrument in semitone increments.
005 Tuning Tuning 427.0Hz–453.0Hz 440.0Hz
Determines the fine tuning of the pitch of the entire instrument in
approx. 0.2Hz increments.
006 Split Point SplitPnt 036–096 (C1–C6) 54 (F#2)
Determines the highest key for the Split Voice and sets the Split
“point”—in other words, the key that separates the Split (lower)
and Main (upper) Voices. The Split Point setting and Accompani-
ment Split Point setting are automatically set to the same value.
007 Touch Sensitivity TouchSns
1 (Soft),
2 (Medium),
3 (Hard),
4 (Off)
2 (Medium)
Higher values produce greater (easier) volume variation in
response to keyboard dynamics. When 4 (Off) is selected, Touch
Response is off and the volume level does not change at all
regardless of whether you play the keyboard soft or hard.
Style file
008 Style Register StyleReg 001–nnn –
Select and register a Style file from flash files that are loaded from
computer (page 18).