Owner's Manual

11 En
Playback features
PREPARATION
CONNECTION/
INITIAL SETTINGS SETTINGS
TROUBLESHOOTING
ABOUT THIS UNIT EnglishPLAYBACK
Playback surround sounds using Yamaha’s exclusive AIR
SURROUND XTREME.
An extended sound is achieved for a 2 channel source.
Play back digitally compressed format such as MP3 and WMA
emphasizing bass and treble extended dynamically.
While watching the TV, compensate the excessive volume differences
to make it easier to hear during the following cases.
• When switching the channel
• When a TV program changed to commercial
• When one program is finished and another program started
Use this feature to adjust the volume balance for each channel
during playback.
7)
Enjoying sound with your
preference
Surround playback
1
Press SURROUND key to switch to
surround mode.
2
Press one of the surround mode keys ( ).
4)
MOVIE: For movies
MUSIC: For music
SPORTS: For sports and news
GAME: For video games
Stereo playback
Press STEREO key to switch to stereo
mode.
Each time you press STEREO key, the function is turned on
(Extended Stereo) and off (Stereo) alternately.
Stereo: Reproduces the stereo sound without any effect.
Extended Stereo: Reproduces a wider stereo sound image.
Playing back digitally compressed formats
(MP3, WMA, etc.) with enriched sound
(Compressed Music Enhancer)
Press ENHANCER key to turn the function
on/off.
5)
Automatic volume level adjustment
(UniVolume)
Press UNIVOLUME key to turn the function
on/off.
6)
Volume balance adjustment
1
Press LEVEL key.
2
Press U/ V key to select adjustable
channel from the followings.
CenterLv: Center
SurLR Lv: Surround left/right
SWFR Lv: Subwoofer
3
Press Y/Z key to adjust the volume.
8)
Adjustable range: -10.0 dB to +10.0 dB
4
Press LEVEL key to exit from the menu.
This unit automatically memorizes the settings assigned to each input
source. When you select another input, the unit automatically recalls the
last settings for the selected input.
• The default setting is “On” for DOCK input, and “Off” for other
inputs.
• Compressed Music Enhancer does not work when the source is
following digital audio signal,
– Dolby TrueHD, DTS-HD Master Audio, etc.
– Signal that sampling rate is more than 48 kHz.
• The default setting is “Off”.
• To set the UniVolume to “Off”, press UNIVOLUME key.
• We recommend turning off the UniVolume function during playback
of music.
Refer to “Volume level of each channel with test tones (☞p. 20)” when
adjusting the test sound.
Example of volume balance
• If you have problems hearing words: Select CenterLv (center) to
increase the level.
• When the sound does not seem like surround sound: Select SurLR Lv
(Surround) to increase the level.
• The volume of subwoofer also can be adjusted by using
SUBWOOFER +/- key.
4) y
5) y
6) y
7) y
8) y