Owner's Manual

INSTALLING THIS UNIT IN YOUR LISTENING ROOM

PREPARATION

This section describes how to choose a suitable installation location for this unit, and how to install the unit using either a

metal wall bracket, rack or stand.

If objects such as furniture are obstructing the path of sound beams, the desired surround sound effects may not be achieved. Make sure

you install this unit where there are no objects in the path of sound beams.

■ Notes on installation

• When installing this unit, be sure to leave an adequate

amount of ventilation space so that heat can escape.

Make sure you leave at least 5 cm of space above

(or below) this unit (as shown in the illustration on the

right).

• We do not recommend installing this unit so that it is

positioned directly on the floor of your listening room.

Please install this unit using a metal wall bracket, rack

or stand.

• This unit weighs 13 kg (28lbs). Be sure to install this

unit where it will not fall if subject to vibrations, such

as from an earthquake, and where it is out of the reach

of children.

• When using a cathode-ray tube (CRT) TV, do not

install this unit directly above your TV.

• This unit is shielded against magnetic rays. However,

if the picture on your TV screen becomes blurred or

distorted, we recommend moving the speakers away

from your TV.

To experience the best surround sound this unit can deliver, make sure you install this unit in a location where objects,

such as furniture, are not in the direct path of the sound beams (see the illustration below).

When installing this unit parallel to the wall, try placing it so that it is in the exact center of the wall (measured from the

left and right corners).

When installing this unit in the corner of your listening room, make sure the speakers are placed between 40º to 50º from

the adjacent walls.

INSTALLING THIS UNIT IN YOUR LISTENING ROOM

Note

Choosing an installation location

5 cm or

Rear

Front

40° to 50°

An object, such as furniture