Owner's Manual

RESETTING THE FACTORY PRESETS
57
ADDITIONAL
INFORMATION
If you want to reset all of your unit’s parameters for any
reason, do the following. This procedure completely resets
ALL the parameters in SET MENU.
After performing the following procedure you must reset the
ROOM TYPE, SP POSITION and ROOM SIZE parameters to
match your surround sound environment.
Be sure this unit is in standby mode.
1 Hold down INPUT on the front panel and
press STANDBY/ON.
“FACTORY PRESET” appears in the front panel
display.
y
To cancel the initialization procedure without making any
changes, press STANDBY/ON.
2 Release INPUT.
3 Press INPUT once more.
“RESET” appears in the front panel display.
To cancel without making any changes, press INPUT
again to display “Cancel”.
4 Press STANDBY/ON to confirm your
selection.
If you selected “Reset”, the unit is reset to its factory
presets and switches to standby mode.
If you selected “Cancel”, the unit switches to standby
mode and nothing is reset.
RESETTING THE FACTORY PRESETS
Note
+
VOLUME
+
INPUT STANDBY/ON
INPUT
STANDBY/ON
VOL
While holding
down, press
INPUT
INPUT
Reset
Cancel
STANDBY/ON