Manual

• Remote control
Refer to
Problem Cause Remedy
page
The remote control Wrong distance or angle. Tile remote control will function within a maximum 19
does not work and/or range of 6 m (20 ft) and no more than 30 degrees oft-
function properly, axis t}om the front panel.
Direct sunlight or lighting (from an Reposition this unit.
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak. Replace all batteries. 18
You cannot operate The external component you want to Press INPUT or the input selector buttons to select 31
external components operate is not selected as the input source, the external component you want to operate.
with this unit's remote
control. Tile remote control code was not correctly Set tile remote control code correctly or try another 51
set. code t_r the same manufacturer using the "LIST OF
REMOTE CONTROL CODES" at the end of this
mannal.
Even if the remote control code is Use the remote control supplied with the external --
correctly set, there are some models that component.
do not respond to the remote control.
The cursor buttons do You pressed an input selector button. Press TEST once. 24
not work during SET
MENU operation.
56