Manual

If you want to reset all of your unit's parameters for any

reason, do the following. This procedure completely resets

ALL the parameters in SET MENU.

After performing the following procedure you must reset the

ROOM TYPE, SP POSITION and ROOM SIZE parameters to

match your surround sound environment.

Be sure this unit is in standby mode.

3 Press INPUT once more.

"RESET" appears in the front panel display.

To cancel without making any changes, press INPUT

again to display "Cancel".

INPUT

#?_..":_..?-.?{.

.,", ,.,, _.,,,,., ,,.,, "

:,.",:::;," t :,." :.'::"£

Hold down INPUT on the front panel and

press STANDBY/ON.

"FACTORY PRESET" appears in the front panel

display.

While holding

INPUT down, press STANDBY/ON

VOL

To cancel the initialization procedure without making any

changes, press STANDBY/ON,

2 Release INPUT.

INPUT

Press STANDBY/ON to confirm your

selection.

If you selected "Reset", the unit is reset to its factory

presets and switches to standby mode.

If you selected "Cancel", the unit switches to standby

mode and nothing is reset.

STAN DBYION