Owner's Manual

ManualsBrandsYamaha ManualsReceivers and AmplifiersYSP-1

ADJUSTING BEAM MODE SETTINGS

You can change the beam mode to suit the input source for this unit using the beam mode buttons. You can switch

between: stereo mode for 2-channel sources, 3 beam mode and 5 beam mode and ST(STEREO)+3 beam mode for

5.1-channel playback.

If you selected a wall installation type (instead of corner) for this unit in EASY SETUP – SP POSITION (page 25), or

you selected wall for MANUAL SETUP – SP POSITION (page 40), all modes are available for selection.

If you selected a corner installation type (instead of wall) for this unit in EASY SETUP – SP POSITION (page 25), or

you selected CORNER for MANUAL SETUP – SP POSITION (page 40), only the stereo and ST(STEREO)+3 beam

modes can be selected.

Outputs audio from the front left and right speakers.

This mode is ideal for playing back hi-fidelity

sources, such as CDs, and should be used to replace

your TV speakers. When playing multi-channel

sources, all signals except those for the front left and

right speakers are mixed down and output from the

front left and right speakers. You can select surround

mode during beam mode, but surround mode

becomes disabled when stereo mode is selected.

Outputs audio from the front left, center and front

right speakers.

Because the listening position area is widened when

signals are output to the front speaker positions only,

you can enjoy excellent quality surround sound over

a wider area. This mode is ideal when you want to

enjoy movies with the whole family.

When playing multi-channel sources, surround left

and right signals are mixed down and output to the

front left and right speaker positions.

Outputs audio signals from the front left and right,

center, and surround left and right speakers.

This mode is ideal for enjoying surround sound

effects to the fullest when watching movie DVDs

recorded in a multi-channel format or playing back 2-

channel sources in a multi-channel format.

To achieve to best surround sound effect, make sure

that there are no objects placed in the path of sound

beams that may prevent the beams from rebounding

directly off your listening room wall. The front left

and right sound beams are output towards the wall.

ADJUSTING BEAM MODE SETTINGS

Stereo mode

AUX

BEAM MODE

VCRSLEEP

Remote control

3 beam mode

5 beam mode

Remote control