Service manual

YSP-1
35
YSP-1
13. 1 SP TEST
ONE SP TEST
Have the sound produced from each driver to check its
condition and installation position.
Use the “SELECT” and “RETURN” keys of the remote
controller for selection.
13. 1 SP TEST
ONE SP TEST




  
  
 

  
• T01–T40 TWEETER
• W01–W02 WOOFER
• ALL Sound is output from all drivers
•– – – OFF
1 SP TEST
Select the sound to be produced in ONE SP TEST.
Use the “SELECT” and “RETURN” keys of the remote
controller for switching.
• T.TONE The test tone (noise) is output.
• SOURCE The external input is output.
1 SP TEST



  
  
TI CHECK
Not applied to this model.
TI CHECK

1 LIM 232C
Select OFF/ON of firmware writing.
* Keep OFF selected other than when writing the firmware.
1 LIM 232C

 
T01 T02 T03 T04 T05 T06 T07 T08 T09 T11T10 T12 T13 T14 T15
T16 T17 T18 T19 T20 T21 T22 T23 T24 T26T25 T27 T28 T29
W02W01
T30 T31 T32 T33 T34 T35 T36 T37 T38 T40T39