Owner's Manual

71 En

MANUAL SETUP

ADVANCED

OPERATION

English

■ OSD SET (OSD settings)

Use to adjust the display position and the background

color of the OSD.

OSD SHIFT (OSD shift)

Use to adjust the vertical position of the OSD. Adjust

towards the – (minus) direction to raise the position of the

OSD, and adjust towards the + (plus) direction to lower it.

Choices: –5 to +5

Initial setting: 0

OSD BACK COLOR (OSD background color)

Use to select the background color of the OSD.

Choices: BLUE, GRAY

■ UNIT SET (Unit settings)

Use this to change the display unit of measurement.

Choices: METERS, FEET

• Select METERS to input distances in meters.

• Select FEET to input distances in feet.

If you change this setting, the adjusted beam settings may change.

Note

OSD SHIFT;;;;;;;;0

OSD BACK COLOR;;;BLUE

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

B)OSD SET

METERS FEET

[ ]/[ ]:Select

[ENTER]:Return

C)UNIT SET