manual

8
En
Operations
Preparing the remote control
Peel off the protection sheet before use.
Operating range of the remote control
Remain within the operating range shown below.
Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
Within 6 m
(20 ft)
Input keys
Select an input source to be played back.
TV ....................TV audio
BD/DVD...........Audio from a device connected to
the BD/DVD input jack
ANALOG .........Audio from a device connected to
the ANALOG input jack
PORTABLE.....Audio from a device connected to
the PORTABLE input jack
BLUETOOTH ...Audio from a Bluetooth connected
device
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV’s input
source to the playback device.
• For details on Bluetooth connection, refer to “Listening to the
sound from a BLUETOOTH device” (p.11).
SUBWOOFER keys (+/–)
Adjust the volume of the subwoofer.
VOLUME keys (+/–)
Adjust the volume of the unit.
MUTE key
Mutes the audio output. Press the key again to unmute.
Volume down (–) Volume up (+)
Volume down (–) Volume up (+)
Flash (on mute)
1
2
Remote control signal transmitter
Transmits infrared signals.
CH LEVEL key
While you listen to the test-tone, you can adjust
the volume level of each channel (p.15).
3